502,466 miembros
5,558 online
Regístrese aquí GRATIS
Iniciar sesión Registrarse
DMG MORI

Contacto

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Alemania
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Planeador de ruta

Planeador de ruta

HSC 70 linear (Reference-Nr. 055040)

Precio a petición


  • Número de referencia 055040
    Fabricación 2014
    Horas en funcionamiento Sin resultados
  • Metal working machine
  • Machining centres
  • High Speed Machining Centers (HSC)
  • DMG MORI
  • Heidenhain

  • General
    Precision centre - Active cooling for electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640
    Technical Data
    Spindle taper HSK-A 63
    Feed rate longitudinal/transverse/vertical 1-50000/1-50000/1-50000 mm/min
    Rapid traverse longitudinal/transverse/vertical 50/50/50 m/min
    Working area 1
    Longitudinal 650 mm
    Cross 600 mm
    Vertical 380 mm
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 30
    Floor space/Weight
    Dimensions (L x W x H) 2,92 x 2,42 x 2,88 (3,0) m
    Weight approx. 9600 Kg

  • Ball Screw package HSC70 with 5 axis Ballscrew package for HSC70 with 5 axis. Rapid feed and rapid traverse, X/Y/Z 50 m/min // 164,05 ft/min, Turning axis with torque drive technology, Acceleration X/Y/Z 6 m/s² // 19,68 ft/s², Active chiller for spindle, guide ways, drives and Ballscrew
    HSC70 5-Axis Specification HSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500kg // 1102,31 lbs absolute measuring systems incl. permanent cooling of B- and C-axis motor
    Spindle speed up to 28,000rpm Shaft Cooling Spindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machine Protection Control (differently from standard)
    Drive power (100% DC) 20 kW
    Drive power (40% DC) 30 kW
    Speed range 20 - 28000 rpm
    Spindle taper HSK-A 63
    Infrared measuring probe TC 52 Infrared touch Probe type Blum TC 52
    Tool Measuring Blum Laser Tool measuring Blum Laser Non-Contact optical tool measuring system including calibration tool
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Production package 600l with ICS Production package 600l-ICS with internal coolant supply (ICS) including paperband filter, swarf conveyor (scraper type) 40 bar/23 l/min/ 600-l tank 530 psi/6 gallon/min / 160 gallon rotating clear view window, bed flushing (recommended: Laminated safety
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Portal V2A cover Portal V2A cover sheets avoid negative chip and coolant influences.
    DMG MORI Netservice - client DMG Netservice - client Green light for your machine Will be installed on an external PC!

  • Ball Screw package HSC70 with 5 axis Ballscrew package for HSC70 with 5 axis. Rapid feed and rapid traverse, X/Y/Z 50 m/min // 164,05 ft/min, Turning axis with torque drive technology, Acceleration X/Y/Z 6 m/s² // 19,68 ft/s², Active chiller for spindle, guide ways, drives and Ballscrew
    HSC70 5-Axis Specification HSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500kg // 1102,31 lbs absolute measuring systems incl. permanent cooling of B- and C-axis motor
    Spindle speed up to 28,000rpm Shaft Cooling Spindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machine Protection Control (differently from standard)
    Drive power (100% DC) 20 kW
    Drive power (40% DC) 30 kW
    Speed range 20 - 28000 rpm
    Spindle taper HSK-A 63
    Infrared measuring probe TC 52 Infrared touch Probe type Blum TC 52
    Tool Measuring Blum Laser Tool measuring Blum Laser Non-Contact optical tool measuring system including calibration tool
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Production package 600l with ICS Production package 600l-ICS with internal coolant supply (ICS) including paperband filter, swarf conveyor (scraper type) 40 bar/23 l/min/ 600-l tank 530 psi/6 gallon/min / 160 gallon rotating clear view window, bed flushing (recommended: Laminated safety
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Portal V2A cover Portal V2A cover sheets avoid negative chip and coolant influences.
    DMG MORI Netservice - client DMG Netservice - client Green light for your machine Will be installed on an external PC!

Enviar pregunta

Más máquinas de DMG MORI Global Marketing GmbH