Mayfran International B.V.
Productos
8
Tratamiento de lubricantes refrigerantes
CleanSweep G2
|
Tratamiento de lubricante refrigerante
Mayfran International
Tratamiento de lubricantes refrigerantes
Mayfran ofrece más: Mayfran CleanSweep G2 representa una generación nueva e inigualable de transportadores de virutas.
CleanSweep G2 está equipado con una banda de alta calidad, secciones de malla autolimpiantes y un sistema de manejo de virutas interno patentado. Por lo tanto, elimina todo tipo de virutas y finos con mayor eficacia que los transportadores convencionales.
CLEANSWEEP G2 TIENE LAS SIGUIENTES VENTAJAS:
CleanSweep G2 está equipado con una banda de alta calidad, secciones de malla autolimpiantes y un sistema de manejo de virutas interno patentado. Por lo tanto, elimina todo tipo de virutas y finos con mayor eficacia que los transportadores convencionales.
CLEANSWEEP G2 TIENE LAS SIGUIENTES VENTAJAS:
- Un transportador de virutas único para un manejo eficiente de todos los tipos de virutas
- Limpieza eficaz del refrigerante gracias a sus cajas de rejilla autolimpiables
- Diseño de descarga de acuerdo con los últimos estándares EN
- Intervalos mínimos de limpieza del tanque, por lo que se necesita menos consumo de refrigerante y mano de obra
DPF Deepbed paper filter
|
Tratamiento de lubricante refrigerante
Mayfran International
Tratamiento de lubricantes refrigerantes
DPF - THE COMPACT PAPER FILTER UNIT
As a deep-bed paper band filter from the MMF series, the DPF impresses with its compact design and a good price-performance ratio.
Its optimized design uses hydrostatic pressure to achieve efficient filtration of the cooling lubricant.
High filter fineness combined with low paper consumption make the DPF an intelligent solution for modern demands on cooling lubricant preparation.
Contaminated cutting fluid enters the filter unit from the side into the inlet diverter.
In the filter housing, the coolant flows through the paper media into the clean tank, while swarf and other residues stay on the paper media.
Swarf and other residues build up and form a filter cake on the paper media and cause the fluid level in the filter to rise until a level sensor is actuated.
The scraper conveyor then removes contaminated paper, swarf and other residues into a collecting container
As a deep-bed paper band filter from the MMF series, the DPF impresses with its compact design and a good price-performance ratio.
Its optimized design uses hydrostatic pressure to achieve efficient filtration of the cooling lubricant.
High filter fineness combined with low paper consumption make the DPF an intelligent solution for modern demands on cooling lubricant preparation.
- Good value for money
- Super compact design (40% less floor space, compared to most other paper filters with similar flow capacity)
- Suitable for all machining processes
- High filter fineness
- 100% side seal efficiency by special Tsubaki chains
Contaminated cutting fluid enters the filter unit from the side into the inlet diverter.
In the filter housing, the coolant flows through the paper media into the clean tank, while swarf and other residues stay on the paper media.
Swarf and other residues build up and form a filter cake on the paper media and cause the fluid level in the filter to rise until a level sensor is actuated.
The scraper conveyor then removes contaminated paper, swarf and other residues into a collecting container
HPBF filtro de derivación de alta presión
|
Tratamiento de lubricante refrigerante
Mayfran International
Tratamiento de lubricantes refrigerantes
El filtro de derivación de alta presión (HPBF) proporciona refrigerante a alta presión a una máquina herramienta y también una limpieza continua del refrigerante principal gracias a su función de filtro de derivación.
CARACTERISTICAS Y BENEFICIOS
CARACTERISTICAS Y BENEFICIOS
- El refrigerante a alta presión proporciona una producción más rápida, una vida útil más prolongada de la herramienta y una mejor calidad de la superficie
- El papel elimina de forma continua y económica las partículas de suciedad en el modo de filtrado bypass, incluso cuando la bomba de alta presión no está funcionando.
- La operación automática del filtro de papel minimiza las pérdidas de producción y los costos de tener que cambiar cualquier bolsa o filtro magnético.
- Mayor tiempo de actividad de la máquina debido a un refrigerante más limpio, menos sedimentación de lodos y menor mantenimiento del tanque de refrigerante
- Los sensores integrados tanto en la máquina herramienta como en los tanques HPBF dan una advertencia cuando el nivel de refrigerante es bajo o alto
- Fácil instalación para máquinas herramienta nuevas y existentes
HPF hydrostatic paper filter
|
Tratamiento de lubricante refrigerante
Mayfran International
Tratamiento de lubricantes refrigerantes
THE UNIVERSAL AND MULTI-VARIANT PAPER BAND FILTER
The HPF paper band filter from our MMF series is a proven standard in our filters. Its optimized design enables the filtration of cooling lubricants of all cutting processes with a high filter fineness. The operating principle of the deep bed filter is based on hydrostatic pressure, which acts on the liquid on the filter paper and thus allows increased throughput and improved filtration with less space and paper consumption. The HPF is easy to handle and offers the possibility of pre-depositing ferromagnetic chips, for example, by means of a magnetic pre-separator.
Contaminated cutting fluid enters from top of the filter into the inlet diverter.
Hydrostatic pressure forces the dirty coolant through the Filter Media and into the clean tank. With this, a filter cake will be formed on the paper media
Media Carrier Belt reliably removes contaminated filter paper from the unit into a collecting container.
The HPF paper band filter from our MMF series is a proven standard in our filters. Its optimized design enables the filtration of cooling lubricants of all cutting processes with a high filter fineness. The operating principle of the deep bed filter is based on hydrostatic pressure, which acts on the liquid on the filter paper and thus allows increased throughput and improved filtration with less space and paper consumption. The HPF is easy to handle and offers the possibility of pre-depositing ferromagnetic chips, for example, by means of a magnetic pre-separator.
- High filter fineness
- Suitable for all machining processes and materials
- Compact design
- Low maintenance
- Perfectly customizable system (magnetic pre-separator, etc.)
- Efficient handling of light floating chips
- 100% side seal efficiency
Contaminated cutting fluid enters from top of the filter into the inlet diverter.
Hydrostatic pressure forces the dirty coolant through the Filter Media and into the clean tank. With this, a filter cake will be formed on the paper media
Media Carrier Belt reliably removes contaminated filter paper from the unit into a collecting container.
RBF-E Rotary belt filter
|
Tratamiento de lubricante refrigerante
Mayfran International
Tratamiento de lubricantes refrigerantes
THE NEW GENERATION OF MEDIA-FREE FILTER UNITS
For customers where maximum availability and low maintenance requirements come first, we offer the RBF-E in our MMF series. The RBF-E is a self-cleaning filter without consumables.
Its rotating endless steel filter fabric not only makes changing the paper roll superfluous, but is also particularly insensitive to increased chips.
The compact design and efficient principle of hydrostatic pressure as the driving force of the filtration allow a sizing of the filter capacity from 100 l/min to 1500 l/min with a good filter fineness.
Paper-free filter system
Resistant construction
Low maintenance
Filter capacity of 100 to 1500 l/min possible
Filter screen cleaning technology by both backwash and brush
v2a filter fabric
MODE OF OPERATION
This filter is based on the build-up of a filter cake which is periodically moved through rotation.
The coarse particles are carried out by special cleats.
Simultaneously, the filter cake is removed by the brush and the filter screen pores are additionally cleaned using a separate clean coolant (flushing) pump from inside to outside.
For customers where maximum availability and low maintenance requirements come first, we offer the RBF-E in our MMF series. The RBF-E is a self-cleaning filter without consumables.
Its rotating endless steel filter fabric not only makes changing the paper roll superfluous, but is also particularly insensitive to increased chips.
The compact design and efficient principle of hydrostatic pressure as the driving force of the filtration allow a sizing of the filter capacity from 100 l/min to 1500 l/min with a good filter fineness.
Paper-free filter system
Resistant construction
Low maintenance
Filter capacity of 100 to 1500 l/min possible
Filter screen cleaning technology by both backwash and brush
v2a filter fabric
MODE OF OPERATION
This filter is based on the build-up of a filter cake which is periodically moved through rotation.
The coarse particles are carried out by special cleats.
Simultaneously, the filter cake is removed by the brush and the filter screen pores are additionally cleaned using a separate clean coolant (flushing) pump from inside to outside.
Sistema Consep
|
Tratamiento de lubricante refrigerante
Mayfran International
Tratamiento de lubricantes refrigerantes
La solución modular para el transporte de astillas y para la limpieza de líquido refrigerante
El ConSep 2000® tuvo éxito en la integración del transporte de astillas y la limpieza de líquido refrigerante en un sistema de espacio muy reducido. El sistema modular manipula sin esfuerzo diversos materiales y tipos de astillas. Las astillas y partículas pequeñas en el depósito de líquido refrigerante se reducen al mínimo. Esta solución económica y flexible es ideal para su uso en centros de procesamiento, tornos automáticos multihusillo, máquinas de mesa de perforación por indexación rotativa y en tornos.
El transportador de cinta articulada para la eliminación de todo tipo de astillas incluyendo cuerdas y rizos. El tambor de filtro integrado limpia el líquido refrigerante hasta 25 μu.
El ConSep 2000® tuvo éxito en la integración del transporte de astillas y la limpieza de líquido refrigerante en un sistema de espacio muy reducido. El sistema modular manipula sin esfuerzo diversos materiales y tipos de astillas. Las astillas y partículas pequeñas en el depósito de líquido refrigerante se reducen al mínimo. Esta solución económica y flexible es ideal para su uso en centros de procesamiento, tornos automáticos multihusillo, máquinas de mesa de perforación por indexación rotativa y en tornos.
El transportador de cinta articulada para la eliminación de todo tipo de astillas incluyendo cuerdas y rizos. El tambor de filtro integrado limpia el líquido refrigerante hasta 25 μu.
