- USB interface for connecting sensors with IO-Link capability to a PC - Quick and easy parameter setting of IO-Link sensors using the memory plug - Complete sets with power supply for the sensors - Reading of the current measured values, process values and parameter settings - Connection cable for connection to the Ethernet interface of the IO-Link master The interface connects sensors with IO-Link capability to a PC and enables parameter setting of sensors, reading of the current parameter setting, of the current measured values and further process values. The LINERECORDER sensor operating software is used for set-up, parameter setting and process data exchange of the IO-Link devices. An EtherNet patch cable is used to connect the IO-Link master and the processor. The memory plug is used where sensor data is to be copied or stored. This could for instance be the case when a defective unit needs to be replaced or several sensors with the same parameter settings are installed.