With the standard machines from the WMM series, you have the ability to measure rotationally symmetrical parts up to 450 mm in length and a maximum diameter of 150 mm. In just one operation, lengths and diameters, radii, angles, chamfers, as well as all the required geometric and positional tolerances, can be identifi ed, measured and reported. Fast measurements, simple operation and the SAPHIR measurement and analysis software make this system the preferred partner for your workshop and measurement room. The distinct advantage over comparable systems is its high measurement accuracy, not only for diameters but also lengths, radii, chamfers and smallest contour details. Furthermore, there is the option to precisely measure blind bores, grooves and other contours and elements not measurable in transmitted light, using incident light. Should this prove insuffi cient, a TP200 6-way touch-trigger probe can be integrated from WMM 300 and a SP25 scanning probe from WMM 450. The 2D shaft measurement machine then becomes a 3D shaft measurement machine. The mathematically integrated CNC rotation axis and the option of individually illuminating the measurement point with the switchable sector incident light guarantee a complete and consistently precise measurement. There are also no additional measurement devices required when carrying out the complete measurement with the shaft measurement machine. Both time and money are saved thanks to the elimination of transport and handling.

All models of the PMS series feature a highly flexible design − ideal for measuring workpieces of up to 2000 mm in size This sturdy portal-type measuring machine has been developed not only for the measurement room, but also for use directly on the shop floor. Thanks to its special design, which allows measurement operations to be performed close to the point of manufacture, ineffective time can be considerably reduced and processes streamlined. PMS thus excels as a great productivity booster and cost saver. Versatility and value were key factors in the design of the PMS series: The machines feature not only a high-resolution CCD camera, but also boast a touch-trigger (tactile) or scanning probe and/or an optionally available laser sensor. This equipment makes them appropriate for universal use in a wide variety of industries. An indexing probe head, which allows workpiece positioning at a precise angle or interval of rotation, provides additional options for three-dimensional measurement Optional features of the PMS series • Touch-trigger probe TP200 • Scanning probe SP25 • Multi-sector incident illumination (switchable) • 2D and 3D digitisation/BestFit • Conoscopic measuring laser • Motorised indexing probe head PH10