DMU 50 (Reference-Nr. 011170)

•  
  Número de referencia 011170

  Fabricación 2023

  Horas en funcionamiento Sin resultados
• Categoría principal
  Metal working machines
• Categoría
  Machining centres
• Tipo de máquina
  Machining centres (Universal)
• Fabricante
  DMG MORI
• Control
  Siemens
• Descripción
  
  

  Technical Data
  Type of main drive	AC
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	35 kW
  Speed range	20 - 20000 rpm
  Spindle taper	HSK-A 63
  Feed rate longitudinal/transverse/vertical	-42000/-42000/-42000 mm/min
  Clamping System	HSK-A 63
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  General
  Universal Milling Machine; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	650 mm
  Cross	520 mm
  Vertical	475 mm
  Floor space/Weight
  Dimensions (L x W x H)	2,85 x 2,35 x 2,75 m
  Weight approx.	7500 Kg

• Especificación
  
  

  Direct measuring system	Direct path measuring system
  Spindle speed 20.000 rpm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  NC swivel rotary table	Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
  Tool magazine 60 pockets	Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
  Swarf conveyor, with cleaned slot screen	Swarf conveyor, scraper type with cleaned slot screen
  Internal coolant supply 40bar/600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard)
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Chip flushing for working area	Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS)
  Double cartridge filter, 25 µm	Double cartridge filter, Finesse of filtration 25 µm, manually reversible (only in connection with separate paper-type filter)
  Rotating clear-view window	Rotating clear-view window (only available with option cabin roof)
  Oil- and emulsion mist separator mechanical	Oil and emulsion mist separator mechanical filter system 1100 m³/h (only available with option cabin roof)
  3D Quick SET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Signal lamp 4-colour	Signal lamp, 4 colours
  SCHUNK Automation Interface PH 150 / PH CELL	Automation interface PH 150 / PH CELL for SCHUNK zero point clamping system consisting of: Interface (Profibus) via M65 Working table with 4-channel rotary joint Automatic loading door Control of SCHUNK NSE VERO-S Zero-point clamping system Automation Sof
  Exhibition design DMU50 3rd generation	Exhibition design DMU 50 3rd chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan
  Safety package for power failure (incl. IPC)	Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overload limiter, Undervoltage monitoring with fast deceleration control
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  3D data model	3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	- OPC UA interface for PH Cell TWIN - Control panel arm control for PH Cell TWIN - Standard installation elements Renishaw Blue Power Probe Kit consisting of: Infrared PP 60 optical probe and Laser tool measurement Renishaw NC4 blue
  Special equipment	Green Mode bestehend aus: -Brake Energy Recovery -LED Lights -High Efficient Chillers -Advanced Auto Shutdown -Adaptive Feed Control -Frequency-Controlled Pumps -Zero Sludge COOLANT Gear Shaping Cycle

• Estado
  Usado

Me gusta 0