DMU 105 monoBLOCK (Reference-Nr. 011201)

•  
  Número de referencia 011201

  Fabricación 2013

  Horas en funcionamiento Sin resultados
• Categoría principal
  Metal working machines
• Categoría
  Machining centres
• Tipo de máquina
  Machining centres (Universal)
• Fabricante
  DMG MORI
• Control
  Heidenhain
• Descripción
  
  

  General
  Universal milling machine in monoBLOCK construction; Control: 3D Control Heidenhain iTNC 530 HSCI
  Technical Data
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Working area 1
  Longitudinal	1050 mm
  Cross	1050 mm
  Vertical	750 mm
  Tool changer
  Tool changer plane	vertical
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool length	395 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	160 mm

• Especificación
  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC swivel rotary table tandem drive	NC swivel rotary table tandem drive Table plate C-axis: d 1,050 x 850 mm / 41.3 x 33.5 in integrated in rigid table 1,200 mm x 850 mm / 47.2 in x 35.5 in 1x T-slot 14 H7 (alignment groove, table centre) 12 x T-slot 14 H12 (clamping grooves) Permissible lo
  Clamping hydraulics 2 channels proportional	Clamping hydraulics 2 channels proportional for connection of hydraulic clamping devices
  Motor spindle SK 50 10,000 rpm 44kW 288Nm	Main drive: Motor spindle SK 50 disc magazine, 30 magazine pockets SK 50 incl. active cooling
  Tool magazine, chain vert., 60 pockets	Tool magazine Vertical chain magazine basic with 60 tool pockets SK 50 or optional chosen spindle tapers
  	Speed range - 10000 rpm
  	Torque (40% DC) 288 Nm
  	Drive power (40% DC) 44 kW
  Spindle taper HSK-A 100	Spindle taper for HSK-A 100 to DIN 69893 (incl. adaptation working spindle and tool magazine)
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Infrared measuring probe Heidenhain	Infrared measuring probe Type Heidenhain TS 649 SK 50 or optionally chosen spindle taper
  Tool measuring in machining area Blum Laser	Tool measuring in machining area Type Blum Laser tool length and tool diameter measuring vertical
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Coolant ring jet	Coolant ring jet for vertical headstock, 16 water jets, 7 air jets
  Production package 40 bar/23 l/min, 600 l tank	Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 1,170 mm / 46 in Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) (theo
  Coolant tempering	Coolant tempering for internal coolant unit 600 lt / 160 gallon: Increased tank 980 lt / 259 gallon Heating capacity max.: 3,000 W / 4 hp Cooling capacity max.: 3,800 W / 5.1 hp
  Spray pistol with pump	Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Oil and emulsion mist separator	Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h
  Tropical package (ambient temp. max. 50 °C)	Package for tropical climate for ambient temperature at machine location from 35° to 50° Celsius
  Safety package for power failure	Safety package for power failure: Voltage control with fast deceleration trigger Uninterrupted Power Supply (UPS) for control Display of last executed program number
  Special equipment	- Machine interface for automation - Communication software for connection to a host computer (DNC operation) - Package of measures for grinding - Special Knoll chip conveyor suitable for grinding operations - Preparation of the machine for a vacuum
  Special equipment	RMS-Sensor
  Special equipment	Adaptation clamping hydraulics: Channel 1: Release of a hydr. clamping system Installation of flow monitor with adaptation machines PLC Channel 2: Blow-out/rest control Channel 3: Vacuum (centric)

• Estado
  Usado

Me gusta 0