CTX beta 800 TC (Reference-Nr. 071591)

•  
  Número de referencia 071591

  Fabricación 2022

  Horas en funcionamiento Sin resultados
• Categoría principal
  Metal working machines
• Categoría
  Machining centres
• Tipo de máquina
  Machining centres (Universal)
• Fabricante
  DMG MORI
• Control
  Siemens
• Descripción
  
  

  General
  - Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate
  Working area
  Swing diameter over guide ways	500 mm
  Turning diameter	500 mm
  Max. Turning Length	750 mm
  Bar diameter max.	65 mm
  Work spindle (left)
  Spindle nose	Flat flange
  Diametre of spindle nose	170h5 mm
  Spindle bore	87 mm
  Spindle diametre on front bearing	130 mm
  Main drive 1
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	32 kW
  Speed range	- 5000 rpm
  Torque (100% DC)	280 Nm
  Max. torque (40% DC)	360 Nm
  C-Axis Speed	-5000 rpm
  Torque of C-Axis (holding torque)	280 Nm
  Floor space/Weight
  Weight approx.	10000 Kg
  Dimensions (L x W x H)	4,96 x 2,26x 2,9 m

• Especificación
  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  crownHobbing	crownHobbing Technology cycle with dialog-guided programming for the production of hirth gearing by the method of impact tooth milling. This option contains the technology cycle with the corresponding input mask.
  5-axis simultaneus machining	5-axis simultaneous machining
  Interpolation turning	Turning-recessing cycle Manufacture of simple sealing Surfaces and grooves using turn/mill centers
  Counter spindle centre	Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Polygon Turning	Polygon Turning for machining of elliptic and polygonal shapes on end faces Note: Only in combination with option B-A0326 Excentric turning and milling operation

• Estado
  Usado

Me gusta 0