CMX 50 U (Reference-Nr. 011200)

•  
  Número de referencia 011200

  Fabricación 2024

  Horas en funcionamiento Sin resultados
• Categoría principal
  Metal working machines
• Categoría
  Machining centres
• Tipo de máquina
  Machining centres (Universal)
• Fabricante
  DMG MORI
• Control
  Siemens
• Descripción
  
  

  General
  Universal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control
  Working area 1
  Longitudinal	500 mm
  Cross	450 mm
  Vertical	400 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min
  Floor space/Weight
  Dimensions (L x W x H)	3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) m
  Weight approx.	4700 Kg

• Especificación
  
  

  Swivel Rotary Table Powered B/C Axes	Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!
  	Mode for positioning only
  	5. Axes (swivelling range) -5/+110 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Distance between T-Slots 63 mm
  	Number of Slots 7
  	Slot width 14 mm
  	Maximum load (table centre) 200 Kg
  	Table surface Ø 630 x 500 mm
  	Type of Measuring system Direct measuring system
  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  inlineMASTER® spindle 15.000 rpm	inlineMASTER® spindle 15.000 rpm Spindle speed range 20 to 15.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 20kW (40% DC) / 14,5kW (100% DC) Torque: 121 Nm (40% DC) / 84 Nm (100% DC) bearings oil-air
  Tool Magazine 60 places	Tool Magazine 60 places SK40 Option includes: - Tool magazine 60 places with double gripper; chain type, servo drive - Tool (Un-) Loading through Magazine Door during AUTO Mode - Tool magazine door - Automatic magazine shutter (instead of brushes
  Air coolant internal (through spindle centre)	Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
  Tropical Package for inlineMASTER	Tropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel - Hydraulic oil temperature sensor - Chiller unit 3,3 kW for main drive Option available for inlineMASTER® 12.000 rpm or 15.000 rpm
  Renishaw Touch Probe-Kit for SIEMENS control	Touch Probe-Kit for SIEMENS control Option includes: - PP40 Touch Probe with optical signal transmission; - TS27R Probe for Tool Measurement; - Calibration Tool; - Calibration Ring; - Case for equipment. Direct measuring system recommended
  Preparation 3D quickSET	Machine Preparation for use of the 3D quickSET Toolkit. Option included software for 3D quickSET for one machine (only with option Touch Probe)
  Production Package 40 bar	Production Package 40 bar Option includes: - Internal coolant supply 40 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarf
  10 Free M-Codes (M180-M189)	10 Free M-Codes (M180-M189) for SIEMENS control
  Safety Package for Power Failure	Safety Package for Power Failure Option includes: - X,Y - axis motor with brake - Overload limiter - Undervoltage monitoring
  Technology cycle MPC 2.0	Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For SIEMENS control
  Machine preparation for PH 150_PH Cell / EROWA	Machine Preparation for Pallet handling system PH 150 / PH Cell with EROWA equipment Option includes: - Automatic lift door on right cabin side - Robot interface (DMG MORI Standard) - Hydraulic / pneumatic preparation with 4 channels on the machine tab
  Special equipment	SK-FA0176 Tool clamping HSK-A63 for tool tapers according to DIN 69893
  Special equipment	PH-150 pallet loading and unloading system with handling system and pallet magazine

• Estado
  Usado

Me gusta 0