CLX 450 TC (Reference-Nr. 071690)

•  
  Número de referencia 071690

  Fabricación 2021

  Horas en funcionamiento Sin resultados
• Categoría principal
  Metal working machines
• Categoría
  Machining centres
• Tipo de máquina
  Machining centres (Universal)
• Fabricante
  DMG MORI
• Control
  Siemens
• Descripción
  
  

  General
  Universal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS
  Working area
  Swing diameter over guide ways	500 mm
  Turning diameter	400 mm
  Max. Turning Length	1100 mm
  Bar diameter max.	65 mm
  Work spindle (left)
  Spindle bore	87 mm
  Spindle diametre on front bearing	130 mm
  Main drive 1
  Drive power (100% DC)	14 kW
  Drive power (40% DC)	17 kW
  Speed range	- 5000 rpm
  Bench speed	485 rpm
  Torque (100% DC)	275 Nm
  Max. torque (40% DC)	345 Nm
  Turning-milling spindle
  Spindle taper	HSK-A 63 DIN 69893
  Spindle speed	-12000 rpm
  Drive power (100% DC)	8,8 kW
  Drive power (40% DC)	10,5 kW
  Torque (100% DC)	73 Nm
  Torque (40% DC)	90 Nm
  locking moment	850 Nm
  Swivelling range	+/- 120 degree
  Tool magazine
  Type of magazine	Chain
  Number of tools	30
  Max. tool diameter	78 mm
  Max. tool-Ø with free adjacent pockets	125 mm
  Floor space/Weight
  Dimensions (L x W x H)	5,19 x 2,11 x 2,47 m
  Weight approx.	11200 Kg

• Especificación
  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Polygon Turning	Polygon Turning for machining of elliptic and polygonal shapes on end faces Note: Only in combination with option B-A0326 Excentric turning and milling operation
  Program state control	With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines.
  Broaching	Technology cycle with dialog-guided programming for the production of any keyways according to DIN6885 or driving grooves according to DIN138 with standard tools. This option contains the technology cycle with the corresponding input mask.
  Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
  Gear Broaching	Technology cycle for pushing internal and external gear teeth on components with single-tooth or multi-tooth shaping tools. The workpiece, the tool and the process parameters can be specified via an operating mask by the user. Important settings of
  Multi-thread cycle 2.0	Multi-thread cycle 2.0 Cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. Targeted overlapping of threads with cross-holes, e.g. redirection systems with bal
  Easy Tool Monitor 2.0	Tool breakage monitoring Easy Tool Monitor 2.0 Simplified holistic view of the actual state of the tools in Side screen of CELOS Setting of one monitoring limit for each tool selected from the tool list. Easy teaching function to measure monitoring limit
  Chuck rinsing device, outside, main spindle	Chuck rinsing device for main spindle, outside
  Chuck rinsing device, outside, counter spindle	Chuck rinsing device for counter spindle, outside
  Clamping pressure adjustment, motor-adj. valves MS	Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program
  Clamping pressure adjustment, motor-adj. valves CS	Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program
  Coolant supply through the counter spindle	Coolant supply through the counter spindle
  Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
  Counter spindle ISM 65, A2-8	Counter spindle as integrated spindle motor, ISM 65, A2-8 - Drive power 14/17 kW (18.7/22.7 hp) (S1-100%d.c. / S3-40%d.c.), - Torque 275/345 Nm (202.8/354.4 lb*ft) (S1-100%d.c. / S3-40%d.c.), - Speed range 0-5.000 rpm - Partial hollow clampin
  Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  Reinforced coolant pump, 12bar,23l/min	Reinforced coolant pump 12 bar, 23 l/min (174.04 psi, 6.07 gal) instaed of 6 bar, 20 l/min (87.02 psi, 5.28 gal)
  Chain magazine for 60 tools	Chain magazine 60fold, instead of chain magazine 30fold
  Workpiece touch probe RMP40, Renishaw	Workpiece touch probe RMP40, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Notes: - Custom meas
  Tool measuring device RP1, Renishaw	Tool measuring device RP1, Renishaw Automatic 5-way tool measurement in the machine by means of touch cubes to avoid measuring and transmission errors. Precise measurement of tool length and tool diameter for stationary tools (turning tools). The measure
  Tool admission Capto C6, instead HSK-63A	Turn/mill spindle and tool magazine with tool reception Capto C6 (Sandvik)
  Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
  MPC - Machine Protection Control	MPC 1.0 - Machine Protection Control Machine protection by quick shutdown of milling head in less than 0,01 sec - only for TC machines with compactMASTER® - only for machines with CELOS® with Siemens control
  Electrical interface for Robo2Go	Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as
  3-jaw chuck, NCE 210-66, Schunk	3-jaw power clamping chuck with through-hole and fine serration Type NCE 210-66, Schunk incl. connecting elements - Max. clamping force 100 kN - Max. actuating force 38 kN - Max. speed 5000 rpm - Serration 1/16 x 90°
  3-jaw chuck, NCE 210-66, Schunk	3-jaw power clamping chuck with through-hole and fine serration Type NCE 210-66, Schunk incl. connecting elements - Max. clamping force 100 kN - Max. actuating force 38 kN - Max. speed 5000 rpm - Serration 1/16 x 90°
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Window rinsing of the security window	Window cleaning of the security window of the working area door by compressed air (Remark: The employment of coolant can limited the view on the workpiece at machining)
  NETservice	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoTconnector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  Module 35 kg	Module 35 kg - Max. load of the robot 35 kg (77.16 lbs) - Triangular gripper base with outlet lance Note: Indicated is the maximum load of the robot in the tool center point. The maximum workpiece weight is depending on the grippers and the workpiece le
  Robo2Go	Flexible workpiece loading and unloading system with a six-axis-industrial-robot - Replaceable workpiece storage incl. workpiece trays: - Max. 88 pieces up to dia. 60 mm (2.36 in) - Max. 29 pieces up to dia. 125 mm (4.92 in) - Max. load of the tray
  3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
  3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
  Pressure adjustment	Pressure adjustment - Manual adjustment of gripping pressure for each gripper(A and B) individually in the range of 2.5 - 6 bar - Mounted on robot arm
  Workpiece tray for shaft parts	Workpiece tray for shaft parts - Max. load of the tray: 500 kg (1102 lbs) - Workpiece dia.: 20 - 170 mm (0.78-6.69 in), workpiece length: 120 - 950 mm (4.72-37.4 in) - Incl. 5 workpiece support kits (variably pluggable) with 50 mm (1.96 in) division:
  Pressure piece	Elastic pressure piece for compensation angle errors at sawing sections
  2x Additional 2-jaw gripper	2x Additional 2-jaw gripper for: - Chuck and shaft parts - Inside and outside handle 10kg module: - Diameter 20-80 mm (shaft) (0.78-3.14 in) 20kg and 35kg module: - Diameter 20-170 mm (shaft) (0.78-6.69 in)
  Robot in white exterior paint	Robot in special paint calcite white (RAL 9010)
  Attention: Preparation for automation is necessary	Attention: Preparation for automation is necessary For the connection of the Robo2Go the machine needs to be prepared with the electrical interface.
  Overall declaration of conformity Siemens	Overall declaration of conformity according to Machine directive 2006/42/EC, for the system Robo2Go + machine with Siemens The supplementary technical documentation of the declaration of overall conformity consist of: - An overview drawing of the ma

• Estado
  Usado

Me gusta 0