DMC 650 V (Reference-Nr. 051370)

•  
  Número de referencia 051370

  Fabricación 2025

  Horas en funcionamiento Sin resultados
• Categoría principal
  Metal working machines
• Categoría
  Machining centres
• Tipo de máquina
  Machining Centers (Vertical)
• Fabricante
  DMG MORI
• Control
  Siemens
• Descripción
  
  

  General
  Vertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	1-42000/1-42000/1-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  Working area 1
  Longitudinal	650 mm
  Cross	520 mm
  Vertical	475 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60

• Especificación
  
  

  Table	Table surface 960 x 570 mm
  	Maximum load (table centre) 800 Kg
  	Slot width 14 mm
  	Number of Slots 5
  	Distance between T-Slots 100 mm
  Spindle speed 20.000 rpm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Tool magazine 60 pockets HSK-A63	Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazine
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  Tool measuring device TT160 retractable	Tool measuring device Heidenhain TT160, automatically retractable measuring unit Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
  Internal coolant supply basic package 2	Internal coolant supply basic package 2 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 20 Bar / 290 psi Tank capacity: 600l / 158,5 US gallons Chip conveyor, Chip flushing working area Cabin roof double cartridge filter 50µm
  Swarf conveyor, with cleaned slot screen	Swarf conveyor, scraper type with cleaned slot screen, Specifically for material with floating chips like e.g. aluminum expansion to internal coolant supply basic package 2,3,4 (only in connection with paper band filter system possible)
  Oil- and emulsion mist separator mechanical	Oil- and emulsion mist separator mechanical (only available with option cabin roof)
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Rotating clear-view window	Rotating clear-view window (only available with option cabin roof)
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  Safety package for power failure (incl. IPC)	Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overload limiter, Undervoltage monitoring with fast deceleration control
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Package for tropical climate	Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine

• Estado
  Usado

Me gusta 0