Tornos

The Mikroturn is an ultra precise, fully hydrostatic, horizontal hard turning machine for hardened workpieces up to 70 HRC. You can machine workpieces with complex contours, or perform combinations of ID and OD machining in a single clamping, avoiding re-clamping errors. A Mikroturn for every type of workpiece: - For high volume productions - For small to medium size parts up to 380 mm in diameter - For heavy and large parts up to 610 mm in diameter - For long workpieces up to 1000 mm in length

The MikroTurnGrind is a full-fledged horizontal hybrid hard turning and fine grinding machine for parts up to 260 x 350 mm in size. It combines two finishing techniques in one machine. Complete complex shaped workpieces within sub-micron tolerances. For machining complex workpieces where small surfaces or inner diameters require grinding after hard turning. - Neck ring - Hydraulic gear pump shafts - Hydraulic eccentric pump shafts - EV motor shafts - Spool valve - Machine tool spindle shaft - And much more

Hard turning and fine grinding up to Ø 1000 mm (39.4?). The MikroturnGrind Vertical is a full-fledged hybrid hard-turn and fine grinding machine. Thus its capability include two full-featured machining technologies, where each process is designed to perform a specific type of operation. The MikroTurnGrind Vertical offers unsurpassed accuracies in both hard turning and fine grinding. You can finish a workpiece using the most suitable process without having to switch machines, or even the fixture. This contributes greatly to short cycle-times, saves process steps, and eliminate clamping errors.

High precision, fully hydrostatic, vertical hard turning machines for large workpieces up to 1500 mm in diameter and 2000 kg in weight. Two vertical mikroturns for large workpieces: - The Mikroturn v2, covers parts up to 1000 mm in diameter and 2000 kg (4,400 lbs) in weight - The Mikroturn v4 machines OD and ID simultaneously, greatly contributing to cycle time savings of up to 40%