MILLTAP 700 (Reference-Nr. 065347)

•  
  Número de referencia 065347

  Fabricación 2016

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Alemania

  

• Categoría principal

  Metal working machines

• Categoría

  Machining centres

• Tipo de máquina

  Machining centres (Universal)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  General
  Highly productive compact machining centres; Control: Siemens 840D solutionline
  Miscellaneous
  Clamping System	MAS 403 - 45°
  Technical Data
  Feed rate longitudinal/transverse/vertical	1-60000/1-60000/1-60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  Working area 1
  Longitudinal	700 mm
  Cross	420 mm
  Vertical	380 mm
  Floor space/Weight
  Dimensions (L x W x H)	1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
  Weight approx.	4100 Kg

• Especificación

  
  

  Spindle speed up to 24,000 r.p.m. BT30	Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
  Table	Table surface 840 x 420 mm
  	Maximum load (table centre) 300 Kg
  	Slot width 14 mm
  	Number of Slots 2
  	Clamping grid M 12, 100 x 100 mm
  Tool clamping for BBT 30 (Big+)	Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°
  Tool magazine 25 places	Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
  Nano package	Nano package Improved temperature stability Only combinable with 24,000rpm or 10,000rpm high torque spindle. Without SW-Package Mdynamiks (C-H0020)
  Production package aluminium band filter ICS 40bar	Production package aluminium Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Zusatztank 600l Chip conveyor useable for fine aluminium chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Cabin roof; maschi
  Automation interface door right	Automation interface inclusive Automation door right and pre- paration Hydraulic interface
  Special equipment	- Special clamping hydraulics, 2 clamping circuits - Preparation for dividing head EA510 with direct measuring system - Additional control bar for clamping hydraulics on the real machine side - Circulation control
  Special equipment	RMS-Sensor

• Estado

  Usado