DMC 80 FD duoBLOCK (Reference-Nr. 130096)

•  
  Número de referencia 130096

  Fabricación 2025

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Alemania

  

• Categoría principal

  Metal working machines

• Categoría

  Machining centres

• Tipo de máquina

  Machining centres (Universal)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  General
  Universal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with Siemens SINUMERIK ONE
  Working area 1
  Longitudinal	800 mm
  Cross	1050 mm
  Vertical	850 mm
  Tool changer
  Application	Universal
  Type of magazine	Wheel
  Tool changer plane	horizontal
  Type of gripper	Double gripper
  Number of tools	123

• Especificación

  
  

  Uni milling head with controlled B axis HSK-A 63	Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining
  NC mill-turn table with pallet	NC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 pallets
  	Type of Measuring system Direct measuring system
  	Table surface Ø 800 x 630 mm
  	Centre bore 50 mm
  	Maximum load (table centre) 1400 Kg
  	4. Axes (swivelling range) 360 x 0,001 degree
  Chip removal	2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in
  Integrated motor spindle speedMASTER®	Drive power (100% DC) 25 kW
  	Drive power (40% DC) 35 kW
  	Torque (100% DC) 86 Nm
  	Torque (40% DC) 130 Nm
  	Speed range - 15000 rpm
  	Spindle taper HSK-A 63
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  Stop block + 3-point-support	Stop block + 3-point-support Design according to DECKEL MAHO Standard
  Tool magazine, wheel, 123 pockets HSK-A 63	Tool magazine wheel magazine (2 wheels) with 123 tool pockets HSK-A 63
  Operation panel for loading station tool magazine	Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
  Infrared measuring probe Renishaw HSK-A 63	Infrared measuring probe Type Renishaw OMP 60 HSK-A 63
  Tool measuring in machining area Blum Laser FD	Tool measuring in machining area Blum Laser DIGILOG Automatic retraction of measuring device in a protective housing, Laser-system for milling tools, 3D touch-probe for turning tools
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  ICS 80 bar,frequency controlled	Internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm through spindle centre (AD) (theoretical pump performance) Stepless pressure programming by NC program
  Sensor package i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  Condition Analyzer	Condition Analyzer Acquisition, visualization and analysis of machine and process data at the machine incl. Performance Monitor
  VCS Complete extension package	VCS Complete extension package for each further machine 2-step procedure
  Minimum lubrication	Minimum lubrication internal through spindle centre external with jets, activated with M functions
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Tropical package (ambient temp. max. 50 °C)	Package for tropical climate for ambient temperature at machine location from 35° to 50° Celsius
  Control cabinet lighting with power outlet	Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra
  Alternating rotation speed	Alternating rotation speed Process stabilisation to prevent vibrations for turning operations
  Multitool	Multitool Use of turning tools with more than one blade for turning operations
  Efficient Production Package	Efficient Production Package Solutions for a safe prozess and for the efficient use of important machining steps
  Tilted measuring cycle	Tilted measuring cycles. Measuring cycle package for tilted measuring of components to determine the center of the workpiece and for alignment of the rotation center to the coordinates-origin via a straight line or hole. Only in connection with Siemens.
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after completed check list
  Special equipment	Oil mist separator

• Estado

  Usado