DMV 110 (Reference-Nr. 051405)

•  
  Número de referencia 051405

  Fabricación 2022

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Alemania

  

• Categoría principal

  Metal working machines

• Categoría

  Machining centres

• Tipo de máquina

  Machining Centers (Vertical)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  General
  Vertical Machining centre; Control: Control SIEMENS ERGOline IV
  Characteristics
  Table surface	1400 x 600 mm
  Tool Magazine with	60 Positions
  Movement X / Y / Z	1100/600/510 mm
  Rapid feed X / Y / Z	30/30/30 m/min

• Especificación

  
  

  AC main drive	Spindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872
  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  Production Package 20 bar with chip conveyor	Production Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwh
  Air coolant internal (through spindle centre)	Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
  Roto clear with multilayer window	Roto Clear - view window with multilayer window with tempered glass
  Renishaw Touch Probe-Kit for SIEMENS control	Renishaw Touch Probe-Kit for SIEMENS control Option includes: - PP40 Touch probe with optical signal transmission - TS27R Probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool - calibration ring - case for equipmen
  Machine preparation for PH 150	Machine Preparation for DMG MORI Pallet loading / unloading system PH 150 / PH Cell with EROWA equipment Option includes: - Automatic lift door on right cabin side - Robot interface (DMG MORI Standard) - Hydraulic / pneumatic preparation with 4 channels
  Tool (Un-) loading	Tool (Un-) Loading through Magazine Door during AUTO Mode Option includes: - Tool magazine door - Automatic magazine shutter (instead of brushes) - Buttons for magazine rotation SIEMENS control
  Automatic front door	Automatic front door Door is controlled from the level of the NC program or by additional button on control panel
  Technology cycle MPC 2.0	Technology Cycle Machine Protection Control MPC 2.0 Technology cycle monitors the spindle for vibrations, crash, imbalance and defective spindle bearings. Machine protection by quick shutdown. For SIEMENS control
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop

• Estado

  Usado