DMP 35 (Reference-Nr. 051128)

•  
  Número de referencia 051128

  Fabricación 2020

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Alemania

  

• Categoría principal

  Metal working machines

• Categoría

  Machining centres

• Tipo de máquina

  Machining Centers (Vertical)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  General
  High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
  Working area 1
  Longitudinal	350 mm
  Cross	420 mm
  Vertical	380 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min

• Especificación

  
  

  Main drive	Drive power (100% DC) 6 kW
  	Drive power (40% DC) 8,5 kW
  	Torque (100% DC) 41 Nm
  	Torque (40% DC) 48 Nm
  	Speed range 20 - 15000 rpm
  	Spindle taper BT 30
  	Clamping System ISO 7388-3 - JD30
  Toolchanger	toolchanger
  Table	Table surface 740 x 420 mm
  	Number of tools 15
  	Type of magazine Wheel
  	Maximum load (table centre) 400 Kg
  Preparation NC-Devider EA510 indirect	Preparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery!
  Chip removal package with chip conveyor	Chip removal package with chip conveyor contents: Chip conveyor Scraper drag type with integrated flat bed sheet with improved filtration discharge height: 600 mm / 23,7 Coolant tank 200 L (DMP 70) // 170 L (DMP 35) Pump capacity external coolant suppl
  RENISHAW touch probe-Kit	RENISHAW measuring suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration tool incl. tool holder
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  10 free M-functions for Siemens	Free M-Codes (M180-M189) for Siemens 840D potential-free on contacts inside electrical cabinet
  IoTconnector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  NETservice	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics

• Estado

  Usado