DMC 75 V linear (Reference-Nr. 051132)

•  
  Número de referencia 051132

  Fabricación 2007

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Alemania

  

• Categoría principal

  Metal working machines

• Categoría

  Machining centres

• Tipo de máquina

  Machining Centers (Vertical)

• Fabricante

  DMG MORI

• Control

  Heidenhain

• Descripción

  
  

  General
  Vertical Machining Centre; Control: 3D control Heidenhain iTNC 530
  Technical Data
  Feed rate longitudinal/transverse/vertical	1-90000/1-90000/1-90000 mm/min
  Rapid traverse longitudinal/transverse/vertical	90/90/90 m/min
  Working area 1
  Longitudinal	885 mm
  Cross	600 mm
  Vertical	600 mm
  Miscellaneous
  Clamping System	HSK-A 63
  Colour
  Floor space/Weight
  Dimensions (L x W x H)	4,9 x 4,3 x 3,2 m
  Weight approx.	12000 Kg

• Especificación

  
  

  Cabine	Full protection cabin
  DMC 75 V linear in 5-axes-version	Additional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi
  Tool magazine 150 pockets	Tool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)
  	Number of tools 150
  Preparation measuring probe TS640	Machine preparation for use of measuring probe Heidenhain TS 640
  Production package 1	Production-package I: Internal coolant supply form A-D with 23l/min at 40bar / 6.1gal/min at 580psi inclusive paper-band-filter with tank capacity 980l / 259gal, rotating clear view window, spray-gun
  Internal air blast cooling	Air blast cooling through the centre of spindle, selectable by M-function or soft key
  Oil and Emulsion Mist Separator	Oil- and emulsion mist separator capacity 600m³/h, 0.5kW respective 21,189ft³/h, 0.7hp
  Tool laser measuring Blum	Laser tool measuring Blum Tool length and diameter measurement inclusive Calibration tool (Direct measuring system recommended!)
  Preparation handling system EROWA	Preparation handling system EROWA interface via M65
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.

• Estado

  Usado