HSC 70 linear (Reference-Nr. 055065)

•  
  Número de referencia 055065

  Fabricación 2015

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Alemania

  

• Categoría principal

  Metal working machines

• Categoría

  Machining centres

• Tipo de máquina

  High Speed Machining Centers (HSC)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  General
  Precision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate
  Working area 1
  Longitudinal	650 mm
  Cross	600 mm
  Vertical	380 mm
  Technical Data
  Spindle taper	HSK-A 63
  Feed rate longitudinal/transverse/vertical	1-80000/1-80000/1-80000 mm/min
  Rapid traverse longitudinal/transverse/vertical	80/80/80 m/min
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	120
  Floor space/Weight
  Weight approx.	9600 Kg
  Dimensions (L x W x H)	7,28 x 6,63 x 3 m

• Especificación

  
  

  Rigid table	Rigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs
  Spindle speed up to 28,000rpm Shaft Cooling	Spindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machine Protection Control (differently from standard)
  	Drive power (100% DC) 20 kW
  	Drive power (40% DC) 30 kW
  	Speed range 20 - 28000 rpm
  	Spindle taper HSK-A 63
  Chain-type tool magazine 120 pockets	Werkzeugmagazin 120 Plätze Kettenmagazin mit Doppelgreifer
  Infrared measuring probe TS 649	Infrared touch probe make Heidenhain TS 649
  Tool Measuring Blum Laser	Tool measuring Blum Laser Non-Contact optical tool measuring system including calibration tool
  Signal lamp 4-colour	Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
  Production package 980l ICS coolant tempering	Production package coolant tempered with internal coolant supply (ICS) Special coolant temperature control for more kinematic stability. Including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
  Air blast through spindle centre dry	Air blast through spindle centre (dry) activated by M function, (up 28.000rpm and higher)
  High-Speed-Settings	High-Speed-Settings Selection of the optimal milling mode for the next machining-step.
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Safety glass at operators door and side panel	Laminated safety glass at operators door and side panel
  Special equipment	Preparation PH 150-8 - automatic lift door at the front cabin side - 4-channel media feed to theStarr table - standard electrical interfaceProfibus with DNC extension of DMG MORI Systems * pneumatic control u. Monitoring the zero point clamping syst

• Estado

  Usado