Description Magnetic chucks with extremely high holding forces for milling applications as an ideal clamping solution for powerful metal cutting processes with simultaneous 5-sided workpiece machining in a single set-up. Field of application 3-axis standard machining center 4-axis vertical machining center 4-axis horizontal machining center 5-axis machining center Advantages – Your benefits 5-sided workpiece machining in one set-up Higher accuracy by setting up once and at best accessibility of the machine spindle Even permanent magnetic clamping force over the entire workpiece Low deformation and vibration clamping of the workpieces Low vibration clamping Improved surface finishes and significantly increased precision. Deformation-free clamping No deformation and inner forces in workpiece due to clamping forces Patented status display Secure clamping and maximum process reliability Control unit compatible with machine control system Can also be used in automated applications Mono-block design Compact and robust design with high rigidity The modular principle Depending on the application or type of machine, the magnetic can be combined or extended in accordance with the modular design principle Clamping within a few seconds Shortest possible set-up times and a resulting increase in productivity Unique energy supply for MAG/DEMAG process Energy-efficient and secure clamping of the workpieces Large selection of accessories Optimal adaptation possibilities in the respective clamping task Options and special information Three square pole sizes for highly individual workpiece clamping The magnetic chucks are each available in three different square pole dimensions. This offers the possibility of individually adjusting the magnetic chuck to its specific clamping task within a larger range of clamping tasks. The decisive factors are the thickness, weight, surface, geometry, and dimensions of the workpiece being machined. Magnetic chuck type MFRS-A1 MFRS-A1 magnetic chucks with a high compact performance of acting magnetic force are generally sufficient for 80% of all applications. Magnetic chuck type MFRS-A2 MFRS-A2 plates have an even higher density of magnetic field penetrating into the workpiece. These are used primarily for workpieces with very uneven surfaces (die-cast and forged parts) and thus a larger air gap, as more magnetic field lines stay in contact with the workpiece.