Description Clamping stations from VERO-S NSE mini modules are used as the basis for extremely fast set-up processes of clamping pallets, clamping devices or workpieces. Field of application 3-axis standard machining center 4-axis vertical machining center 4-axis horizontal machining center 5-axis machining center Advantages – Your benefits SCHUNK modular system Innumerable combinations of standard clamping devices suitable for different types of machines Low height Increases the workspace of your machine All pneumatic modules can be operated at a system pressure of 6 bar Additional pressure intensifiers are not required Positioning via short taper Very easy joining process at a repeat accuracy of < 0.005 mm Patented dual stroke system for highest pull-down forces Therefore extremely rigid clamping without vibrations Form-fit, self-retained locking Full pull-down force is maintained even in the event of a pressure drop Corrosion-free stainless steel design Long life time and maximum process reliability Turbo integrated by default Pull-down force increased by up to 300% for optimum use of the machine´s performance, hence high efficiency A consistent clamping pin size fits for all NSE mini-modules No danger of confusion or incorrect operation Integrated slide monitoring Can be used in automated applications Options and special information Variability due to the modular system Whether as 2-fold, 4-fold or multiple clamping station – VERO-S NSL mini individually adapts to all requirements. For every application. On all conventional machine tables. Through a modular system the NSL mini 100-2 clamping stations can be extended as often as desired. Mounting is easy: replace locking screws through adapters for the air coupling and interconnect the clamping stations.