Description Clamping stations for general milling applications with VERO-S NSE plus modules as a basis for extremely fast set-up processes of clamping devices. Field of application 3-axis standard machining center 4-axis vertical machining center 4-axis horizontal machining center 5-axis machining center Advantages – Your benefits SCHUNK modular system Innumerable combinations of standard clamping devices suitable for different types of machines 100% compatible with NSL plus clamping stations Existing NSL plus clamping stations can be replaced 1:1 by new NSL3 clamping stations All pneumatic clamping stations can be operated with a system pressure of 6 bar Additional pressure intensifiers are not required Positioning via short taper Very easy joining process at a repeat accuracy of < 0.005 mm Patented dual stroke system for highest pull-down forces Therefore extremely rigid clamping without vibrations Form-fit, self-retained locking Full pull-down force is maintained even in the event of a pressure drop The modules are stainless and completely sealed Long life time and maximum process reliability Options and special information VERO-S NSL3 2-, 4-, 6- or 8-way clamping station for mounting all current clamping pallets as well as clamping devices with the corresponding gauge for bore holes. VERO-S NST3 4-way clamping stations especially designed for VERO-S tombstones in the sizes 400 and 500 mm.