Description A magnetic switch is used for monitoring the status of automation components.They detect the magnets fixed inside the component without contact. In addition to further process data, the sensor outputs the process of the magnetic field via the IO-Link interface. Field of application Used for monitoring SCHUNK grippers. The magnetic switch with IO-Link interface from SCHUNK detects metals without contact and wear, and is resistant to vibration, dust, and humidity. The magnetic switch is installed in a C-slot and therefore does not produce any additional interfering contour. Advantages – Your benefits Control via IO-Link for the evaluation of data such as temperature, evaluation quality or the sensor identification Integrated electronics leads to a compact design and enables the use of cables with standard plug connectors Suitable for narrow installation spaces due to teaching via IO-Link interface Version with LED display is used to indicate the status of the IO-Link connection C-slot sensor for space-saving, easy, and fast assembly on the product Options and special information Sources of interference Sensors can be influenced by other magnetic fields in the immediate vicinity. Disturbing magnetic fields can be generated by motors, electric welders, permanent magnets or magnetized material (so-called soft magnets) such as hexagon socket wrenches, chips, etc. High protection class IP67 when plugged in, for use in clean or dusty environments or in case of contact with water. Operability in case of contact with other media (coolant, acids, bases, etc.) is often given, however cannot be guaranteed by SCHUNK.