Description Dense 2-finger parallel gripper that meets the requirements of IP67 and does not allow substances to enter the working environment Field of application The gripper is ideally suitable for handling of rough or dirty workpieces. Its field of application extends from the loading and unloading of machines, such as in the case of sanitary blocks, grinding machines, lathes or milling machines, to handling tasks in painting plants, in powder-processing or underwater. Advantages – Your benefits - Robust interior multi-tooth guidance for the precise handling of different workpieces - Lip seal at the outside round guidance for permanent, secure gripper sealing - High maximum moments possible suitable for using long gripper fingers - Sealed 2-Finger Parallel Gripper complies to IP67 requirements despite a high moment load - Drive concept oval piston for maximum gripping forces - Mounting from two sides in three screw directions for universal and flexible gripper assembly - Air supply via hose-free direct connection or screw connections for flexible pressure supply in all automated systems - Compact dimensions for minimal interfering contours in handling Options and special information - Gripping force maintenance version AS/IS The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/S version this acts as a closing force, in the IS version as an opening force. - Force intensified version KVZ if higher gripping forces are required - ATEX version EX for explosive environments - Additional versions Various options can be combined with each other. Numerous additional options are also available – just tell us what your task is! - Integrated air purge connection impedes the ingress of dirt into the inside of the gripper Please note that the gripper must utilize another hose for ventilation or for a switchable air purge connection, altogether three hoses are needed. For detailed information, please refer to the assembly and operating manual.