531,798 miembros *
3,200 online*
Regístrese aquí GRATIS
Iniciar sesión Registrarse
DMG MORI

Contacto

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Alemania
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Planeador de ruta

Planeador de ruta

NHX4000 (Reference-Nr. 064018)

Precio a petición


  • Número de referencia 064018
    Fabricación 2014
    Horas en funcionamiento Sin resultados
  • Metal working machine
  • Machining centres
  • Machining Centers (Horizontal)
  • DMG MORI
  • Mitsubishi

  • General
    Horizontal Machining Centre - Direct scale feedback as standard - Approx. 40% reduction in total power consumption compared to conventional models - 14% higher rigidity achieved by the use of a spindle with a large-diameter bearing; Control: M730BM with MAPPS IV
    Working area 1
    Longitudinal 560 mm
    Cross 660 mm
    Vertical 560 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min

  • NC rotary table with pallet changer Table surface 400 x 400 mm
    Maximum load (table centre) 400 Kg
    Clamping grid 80 x 80 mm
    Rotation speed max.4. Axis rpm
    4. Axes (swivelling range) 360 x 0,001 degree
    Tool magazine Application Horizontal
    Type of magazine Wheel
    Number of tools 40
    Type of gripper Pick up
    Cabine Full protection cabin
    Full 4th axis rotary table Full 4th axis rotary table Minumum pallet indexing angle is changed to 0.001° from the standard 1°.
    Auto-Coupler Hydraulic Fixture Interface (hydraulic 1 circuit + workpiece seating detection 1 line) Auto-coupler spec. (hydraulic 1 circuit + workpiece seating detection 1 circuit) for 2-station APC (with pallets) With an auto-coupler, hydraulic pressure is supplied to fixtures by a pallet through system. Only hydraulic pressure is supplied to the tab
    High-speed spindle 20,000 min-1 High-speed spindle 20,000 min-1, 18.5/ 15/ 11 kW (HSK-A63)
    Through-spindle coolant system I/F (center through, 7.0 MPa) (KNOLL) Through-spindle coolant system I/F (center through, 7.0 MPa) (KNOLL) This is the I/F for mounting the high pressure coolant system manufactured by Knoll (separate type) (7.0 MPa). The coolant path to the tool tip is a center through type. The high pressu
    Mist collector I/F (duct 150mm + electric parts only) (HVS-150) Mist collector I/F (duct 150mm + electric parts only) (HVS-150) This is the I/F for mounting the mist collector HVS-150 manufactured by Akamatsu Electric Co.,Ltd. This specification includes a φ150 mm duct and a set of electrical components. The mist
    Manual pulse generator (separate type) Manual pulse generator (separate type) Adding handy type pulse handle improves operability during set-up operation. The switch on the operation panel can change which pulse handle is used on the operation panel or handheld side. Handheld pulse handle of t
    Knoll KF110/700 Filter System 4.0 MPa Knoll KF110/700 Filter system 4.0 MPa - 31 l/min - 5.5kW high pressure coolant pump - vario valve - paper filter - 700 l coolant tank with cleaning opening - float switch - electrical connection 3x400 V - hose assembly (5m) and interface cable (10m). With

Enviar pregunta

Más máquinas de DMG MORI Global Marketing GmbH