internal holes and contours | |
cylindrical shank Ø 20/25/32/40 mm with clamping surface | |
up to 150 m/min | |
0.05–0.2 mm/rev | |
up to 0.02 mm | |
up to 1 mm | |
emulsion or oil; filtration of the lubricant (< 40 µm) can improve the surface quality and the tool life | |
surface roughness (Rz) up to 15 µm | |
external shafts and contours | |
square shank 16/20/25 mm left or right hand | |
240° | |
48 × 5° | |
up to 150 m/min | |
0.05–0.2 mm/rev | |
up to 0.02 mm | |
up to 1 mm | |
emulsion or oil; filtration of the lubricant (< 40 µm) can improve the surface quality and the tool life | |
surface roughness (Rz) up to 15 µm | |
chamfers, recesses and flat surfaces | |
square shnk 12/16/20 mm, left hand or right hand | |
up to 150m/min | |
0.05-0.1mm/rev | |
emulsion or oil; filtration of the lubricant (< 40 µm) can improve the surface quality and the tool life | |
surface roughness (Rz) up to 10 µm | |
Internal plane surfaces | |
cylindrical shank from Ø 16 mm | |
up to 50 m/min. referred to the biggest rolling diameter | |
0.05 mm/rev | |
up to 0.01 mm | |
up to 1 mm | |
emulsion or oil; filtration of the lubricant (<40 μm) can improve the surface quality and the tool life | |
surface roughness (Rz) up to 8 μm | |
up to 45 HRC |
external machining of corrugations, contours, flat surfaces | |
Vierkantschaft, linker oder rechter Halter, Zylinderschaft | |
bis zu 150 | |
0,05 bis 0,2 | |
bis 0,02 | |
bis 1 | |
Emulsion oder Öl; eine Filterung des Schmiermediums (<40 µm) kann die Oberflächenqualität und die Lebensdauer des Werkzeugs verbessern | |
Rautiefe bis Rz 15 µm | |
external shafts and contours | |
square shank 20 × 32/25 × 32/32 × 32 | |
180° | |
36 × 5° | |
up to 150 m/min | |
0.05–0.2 mm/rev | |
up to 0.02 mm | |
up to 1 mm | |
emulsion or oil; filtration of the lubricant (< 40 µm) can improve the surface quality and the tool life | |
surface roughness (Rz) up to 15 µm | |
internal holes and contours | |
cylindrical shank Ø 20/22/25/32/40 mm | |
240° | |
48 × 5° | |
up to 150 m/min | |
0.05–0.2 mm/rev | |
up to 0.02 mm | |
up to 1 mm | |
emulsion or oil; filtration of the lubricant (< 40 µm) can improve the surface quality and the tool life | |
surface roughness (Rz) up to 15 µm | |