584,330 miembros *
6,176 online*
Regístrese aquí GRATIS
Iniciar sesión Registrarse
Metal Work Deutschland Productos

Leader of pneumatic components.

Controladores y accionamientos

Accionamientos lineales

Ejes y pórticos eléctricos
Ejes y pórticos eléctricos
Accionamiento lineal
Metal Work Deutschland GmbH
Accionamientos lineales
Ejes y pórticos eléctricos
Además de los accionamientos puramente neumáticos, Metal Work también suministra cilindros, ejes y pórticos eléctricos. Los ejes eléctricos y los pórticos desempeñan un papel importante en la tecnología de la automatización en particular. La gama incluye ejes unidimensionales en varios diseños, así como pórticos tridimensionales. Esto significa que podemos ofrecer la solución adecuada para cada necesidad. Translated with DeepL
Antrieb Elektrozylinder ISO15552
Antrieb Elektrozylinder ISO15552
Accionamiento lineal
Metal Work Deutschland GmbH
Accionamientos lineales
Antrieb Elektrozylinder ISO15552
An electric cylinder with a connection interface in accordance with ISO 15552. The piston rod extension is controlled by a system with a hardened screw and recirculating ball screw nut. The piston has a guide strip calibrated to reduce to a minimum play with the barrel and hence vibration during ball screw rotation. The cylinder can be equipped with a built-in non-rotating system featuring two opposing slides that run in separate longitudinal slots in the barrel. The piston comes with magnets and the barrel has longitudinal slots for housing sensors. The piston rod has increased outside diameter and thickness to make it extra rigid and more resistant to radial and peak loads. A system for greasing the screws is included. Numerous standard accessories for pneumatic cylinders, can be used for mounting the cylinder. Accessories made of aluminium, or made of steel for heavy-duty operations, can be used. The motor can be selected from an optimised range, which encompasses both STEPPING and BRUSHLESS motors. There is a version with a brake mounted on the motor. Stepping motors are also available with a brake and encoder (all BRUSHLESS motors come with an encoder). It is important to remember that the brake is static type, so the motor must be stopped before the brake is engaged. There is a version for in-line assembly, where the drive shaft is jointed directly onto the screw. There is also a geared motor version, where transmission is provided by pulleys and a cog belt with a transmission ratio of 1:1. A planetary gearbox, in the case of a Ø 100 in-line cylinder, and pulleys with a non-unitary gear ratio, in the case of a Ø 80 and Ø 100 cylinder, can be used to increase the torque. Suitable motor drives are provided. Special adaptor flanges and joints can be provided if the customer wishes to use a particular brand of motor.
Antrieb Elektrozylinder Rund DC
Antrieb Elektrozylinder Rund DC
Accionamiento lineal
Metal Work Deutschland GmbH
Accionamientos lineales
Antrieb Elektrozylinder Rund DC
In the ELEKTRO ROUND DC cylinder, the forward movement of the piston rod is obtained via an acme screw and a self-lubricating technopolymer nut. This piston has a guide ring that is calibrated to minimize the backlash with the cylinder liner and reduce vibration during rotation of the screw. The piston also comes with a magnet for magnetic sensors. The system is driven by a direct current motor available in two versions, 12 and 24VDC. The position of the motor can be controlled using an optional encoder. A resettable optional fuse can be inserted in the cylinder for motor thermal overload protection. The motor used has a planetary gearbox with a 1/13 or 1/25 ratio. Depending on the configuration (screw pitch and gear ratio), this cylinder can be either irreversible (supporting the load with the motor off) or reversible under load. Both versions are supplied without piston rod anti-rotation device, which will be provided by the customer outside the cylinder. It is available in two versions: - with an in-line motor, where the motor shaft is connected directly to the screw via a coupling. - with a geared motor, where the transmission of motion is ensured by three cogwheels with a ratio of 1:1. This cylinder is designed for use with IP65 protection rating. The solutions with the acme screw are generally suitable for applications where the number of operations per time unit is reduced; the degree of accuracy is not particularly high due to heating of the screw-leadscrew assembly; wear over time does not create inconveniences, no high forces and speeds are required at the same time.
  • In-line version
  • Geared version

Otros controladores y accionamientos

Programmier-Einheit e.Motion
e.motion
Otro controlador y accionamiento
Metal Work Deutschland GmbH
Otros controladores y accionamientos
Programmier-Einheit e.Motion
  • e.motion
Programmierbare Steuereinheit für Schrittmotoren - e.drive
e.drive
Otro controlador y accionamiento
Metal Work Deutschland GmbH
Otros controladores y accionamientos
  • e.drive