DUNKES HR 63TR 25HRW 25

•  
  Reference number 1049-734635

  Manufacture Year 1990

  Operation Hours not applicable

• Vendor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Sheet-straightening machines

• Manufacturer

  DUNKES

• Technical data

  material width

  3000 mm

  material thickness

  0 mm

  no. of straightening rolls

  0

  total power requirement

  22 kW

  weight of the machine ca.

  14,5 t

  dimensions of the machine ca.

  7,5 x 2,5 x 2,9 m

• Description

  D U N K E S
  Hydraulic Straightening System for Flat material and Section Material
  With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25
  Year 1990 ( H 89-1960 )
  ____________________________________________________________
  
  Consisting of:
  Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of
  Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm,
  Distance to column 620 mm, sensitive Straightening stroke via handlever with
  turret-stop, Measuring device for accurate straitening via a lightbar
  Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on
  right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd
  57/10 mm/s, designed as Pressbow which moves in both directions against a
  straightening tool to avoid the turnovers of workpiece during straightening
  process, 4 tool posts front and backside/left and right with a distance of
  600 mm, Handlever for stroke movement.
  Torsion straightening device for twisting the section material up to a power
  of 25.000 Nm,
  Resistance Moment 69.000 mm³, twisting force max. 320 N/mm², workpiece
  glamping 320 kN,
  mounted on left hand side of Press as a integrated unit. The left handed
  slide can be moved approx.. 3000 mm and is equipped as the clamping station
  for the workpieces and the right handed unit is for clamping and twisting
  hydraulically this workpiece up to 35 ° Display to see the torsion on a
  lightbar.For the crossmovement/loading of workpiece is a roller chain
  available
  Straightening Bed for placing and for moving the workpiece towards to the
  straightening devices,
  consisting of conveyor roller tables left and right on the press with each
  approx. 3000 mm length,rollers can be lifted pneumatically for easier
  transportation. Between the two beds is a working gap for the vertical
  straightening cylinder with two adjustable counter steadies with
  exchangeables jaws. Mechanical measuring device to check tension of
  workpiece built on presstable.
  The 3 Straightening positions are electrically separated, so only one
  position can be used on a time. Various pressing tools in different shapes
  and lengths available. Also a roller support for straighten cylindrical
  shafts or tubes up to 1.800 mm length to place it on the a.m. straightening
  bed.
  
  Oil tank capacity for hydraulic oil approx. 500 liters
  
  Total electrical load approx. 22 kW - 400 V - 50 cycles
  Weight approx. 14,5 to,
  Outside dimension: 7,5 x 2,5 x 2,9 m height
  
  Condition : good to very good – can be soon inspected under power.
  Delivery : ex stock – as inspected here in stock
  Payment : net – after completion of contract
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used