TRUMPF TRUMABEND V 85

•  
  Reference number 1049-695168

  Manufacture Year 1996

  Operation Hours not applicable

• Vendor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Pressbrakes

• Manufacturer

  TRUMPF

• Control

  TRUMPF Delem DA 65T

• Technical data

  pressure

  85 t

  chamfer lenght

  2000 mm

  distance between columns

  1750 mm

  Control

  TRUMPF Delem DA 65T

  total power requirement

  10 kW

  weight of the machine ca.

  7,5 t

  dimensions of the machine ca.

  m

• Description

  T R U M P F (Germany)
  CNC - Controlled Hydraulic Press Brake
  Model TRUMABEND V 85, year 1996 Serial No. 88 31 52
  __________________________________________________________________________________
  
  Pressure, max. 85 to
  Working width, max. 2.050 mm
  Working width between columns 1,750 mm
  
  Side daylight of each column 410 mm
  Max. distance
  between upper and lower tool holder w/o tools 350 mm
  Adjustment of upper tool holder approx. 300 mm
  Table width approx 105 mm
  Height of Table from floor approx. 1.050 mm
  
  Max. stroke 215 mm
  Stroke, bending speed 1 - 10 mm/sec
  Stroke, rapid traverse 200/135 mm/sec
  Adjustment range of back gauge, approx. 800 x 300 (vertical) mm
  
  Total electrical load, approx. 10 kW - 400 V - 50 Hz
  Weight, approx. 7,5 to
  
  Accessories / Special Features:
  * The stroke movement of the upper toolslide is driven by two hydraulic
  pistons and proportional valves and controlled by two electronic
  measurement scales.
  Therefore it can be achieved a tilting line of the upper tool of
  approx. 10 mm
  * TRUMPF – CNC Control model DELEM Type DA 65 T with 6 controllable Axis
  like:
  Y1, Y2, X, R, Z1 a. Z 2, with direct programming of bending cycles on
  the pendant control and screen with grafics.
  * CNC-Controlled Cambering by separate control unit inside the table.
  * Hydraulic driven fast clamping of upper and lower tools
  * On backside of machine mounted a gauge stop slide controlled in 2 axis
  ( =R a.X-Axis) in vertical stroke and forward and backwards, three
  sheet metal stopfingers.
  * Two-handed release on mobile control stand, and/or foot switch.
  * Pressure Manometer for the Hydraulic System and oil filter
  * In front of machine there are 2 lengthwise adjustable sheet metal
  supports.
  * Various Bending tools smaller size,
  * Swivable Safety covers on side and backside doors with plexi-glass
  shields, etc.
  
  Condition : Good to very good – stable design.
  Machine can be inspected under power.
  Delivery : Ex stock, as inspected.
  Payment : Net, after conclusion of contract.
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used