Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
ZIMMER Z185R
Request about this Machine
Asking price
- Reference number 1035-04495Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
Sawing, Filing and Cutting-off MachinesType of Machine
Band Sawing Machines (Horizontal)Manufacturer
ZIMMERTechnical data
- cutting diameter
- 185 mm
- saw band length
- 2.080 x 20 x 0,90 mm
- cutting width
- 100x185 mm
- connected load frequency
- 230 V
- band speed
- 35 und 70 stufenlos m/min
- mitre joint 90° (angle-iron till)
- 60 °
- total power requirement
- 2,35 KW
- weight of the machine ca.
- 195 kg
- dimensions of the machine ca.
- 1280 x 550 x 1480 mm
Description
We must ask you to request machines from us on a daily basis in the near future.
Please notice:
We would be happy to make you a free offer. However, please understand that we
only process inquiries with complete address details.
An inexpensive and powerful band saw for sporadic workshop use
The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -
60 ° left.
After the cut, the machine stops due to a safety limit switch.
The lowering is continuously adjustable via a hydraulic system.
The manual lifting of the saw arm after the cut can - on any
Position. The saw arm remains in the desired position.
* Metal band saw with stepless electronic speed regulation and
automatic lowering
* Selector switch for hydraulically controlled or manual belt arm lowering
* Saw arm can be swiveled up to 60 ° to the right
* Quick release vice
* Tape guide with 8 ball bearings
* Hydraulic saw band tensioning with tensioning pressure display and cut off of
the band breakage
* including coolant device
* including machine base cabinet
The Z185 / R has the following standard equipment:
- hydraulic cylinders
- emulsion pump
- eccentric clamp
- underframe
- saw band
The machine is fully assembled and delivered immediately ready for use
Technical specifications:
Motor power: 230 V / 2.35 kW
Cutting speed: 30 - 75 m / min. stepless
Saw band dimensions: 2.085 x 20x 0.9 mm
Footprint: 550 x 1,280 x 1,480 mm
Working height: 915 mm
Weight: 190 kg
This ad was created with MODUL MWS - the software solution of LogoTech.State
Used