TCI BP-C 4020

•  
  Reference number 1069-1240

  Operation Hours not applicable

• Vendor

  HESSE + CO Maschinenfabrik GesmbH
  Industriezentrum NÖ-Süd, Straße 4 Objekt 8
  2351 Wiener Neudorf

  Austria

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Pressbrakes

• Manufacturer

  TCI

• Technical data

  neu

  ca. 14 - 16 Wochen ab Auf

  Spanien

  174900 €

  3445.53 €

  4000x2000 mm

  37 kW

  Max. Materialstärken

  200 mm

  150 mm

  120 mm

  100 mm

  150 mm

  1

  4000 mm

  2000 mm

  200 mm

  60 m/min

  20 m/min

  +/- 0,05 mm/m

  +/- 0,025 mm/m

  6,4 m3

  790 kg/m2

  37 kW / 50 PS

  4136 bar

  4,1 l/min

• Description

  THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 HP SL-VI · 4000 bar · 1L with: - Hydraulic pump of variable flow and compensated pressure - High / low pressure selection that allows piercing - Electrical inversion of the cutting head - Noise level below 80dB - Leakage detection in de high-pressure circuit - Long lasting high pressure seals - System to uninstall de piston without uninstalling the cylinder - Air / oil heat exchanger •Installation of high pressure tubes •Human machine interface TCI SMARTTOUCH V6.0 •Communication system to communicate between the machine and TCI •CAD/CAM software and Postprocessor Lantek Expert 2D with autonesting •Machine safety system. Declaration of conformity and CE marking • Anti collision system TCI COLLISION PROTECTION 2,0 • Height contol system TCI SRA 3.0 Included special accessories: • Water softener TCI HIDROSYSTEM 2.0 (2-3-shift) • Oil/water chiller (closed circulation) • Slit clearance TCI EXTRACTION SYSTEM 2.0 4020 • Proportional control valve KMT 50 HP OEM THE CUTTING SYSTEM XY •A frame built with structural steel profiles, for a working range of 4000mm in the x axix •Water tank with material supports and water level regulation, constructed from stainless steel sheets. •An axis with a guided system on a bridge independent from the cutting table (X axis) consisting of a set of high precision skates and guides. This system provides a reliable linear transport, ensures a high rigidity, a minimum of frictional resistance and a high load capacity. The entire assembly is driven by a rack system / Precision reducer, which guarantees maximum performance, which is connected to a brushless AC motor. •The transverse linear axis (Y axis) mounted on the linear axis X uses the same system described in the previous point. •A nozzle support head (Z axis) is provided with a vertical guide system. Includes automatic adjustment of cutting height. •One long lasting nozzle, with orifice and pneumatic jet control valve. •Control panel integrated in the control cabinet to manage the machine. •Pushbuttons for autimatic operation with emergency stop.
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used