EHT EASYPRESS 85-20

•  
  Reference number 1073-97007

  Manufacture Year 2000

  Operation Hours not applicable

• Vendor

  Frech GmbH
  Werderstrasse 82
  74889 Sinsheim

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Pressbrakes

• Manufacturer

  EHT

• Technical data

  pressure

  085 t

  chamfer lenght

  2050 mm

  distance between columns

  1650 mm

  column arm

  400 mm

  stroke

  240 mm

  dayligth

  320 - 560 mm

  ajustment speed

  150 mm/sec

  working feed

  15.0 mm/sec

  return speed

  150 mm/sec

  back stop - adjustable

  5.0 - 1000 mm

  table width

  110 mm

  work height max.

  1050 mm

  operating pressure

  max. 297 bar

  compressed air

  4.5 - 6.0 bar

  oil volume

  200 l

  operating pressure

  340 bar

  total power requirement

  7.5 kW

  weight of the machine ca.

  5900 kg

  range L-W-H

  4100 x 2100 x 2750 mm

• Description

  ** with increased installation height / piston stroke
  ** well-maintained condition (!!)
  
  Equipment:
  - CNC electro-hydraulic press brake
  - including CYBELEC CNC control
  * swiveling control panel at the front right
  * external screen
  - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning
  - CNC electro-motorized back stop (X axis)
  * Travel range .. 5.0 - 1,000 mm
  * Travel speed .. 250 mm/sec.
  - CNC electro-motorized height adjustment of the back stop (R axis)
  * Travel range .. 70 - 235 mm
  * Travel speed .. 100 mm/sec.
  - CNC electro-motoric adjustment of the stop fingers (Z axes)
  * Travel range Z1 .. 405 - 1.565 mm
  * Travel speed .. 1.000 mm/sec.
  * Travel range Z2 .. 485 - 1.645 mm
  * Travel speed .. 1.000 mm/sec.
  - CNC electro-motoric table crowning
  - CNC pneumatic die displacement (I axis)
  - EHT pneumatic tool clamping - upper tool
  - EHT manual tool clamping - lower tool
  * Tool holder 90.0 mm + 13.0 mm possible
  - 1x freely movable 2-hand/foot control
  - 2x front, stable support arms including "sliding system"
  - side protective device (swinging doors)
  - rear protective device (swinging door)
  - original operating instructions + circuit diagram etc.
  
  * Special accessories included:
  - Oil cooler for use in continuous operation
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used