Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
Seramill 410 - Gantry portal milling machine
Request about this Machine
Asking price
- Reference number FOREST LINE Gantry PortalfräsmaschineManufacture Year 1995Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
Milling machinesType of Machine
Portal & Gantry milling machinesManufacturer
FOREST LINEControl
CNC Siemens Sinumerik 840 CDescription
X-Axis (mobile portal) 8.000 mm
Working feed continuous adjustable 0,001-5.000 mm/min
Rapid traverse 15 m/min
Y-Axis (Transverse carriage) 4500 mm
Working feed continuous adjustable 0.001 – 5.000 mm/min
Rapid traverse 15 m/min
Z-Axis (Head/autom. Slider way) 950 mm
Cross section of the slide 320 x 320 mm
Working feed continuous adjustable 0.001 – 5.000 mm/min
Universal milling head
Indexing all 2,5 ° Grad
Spindle speed continuous adjustable 10 - 3.200 U/min
Power 22kW in the lower area up 280 U/min
Power 22 kW in the higher area up 940 U/min
2 Speed areas
Low area with constant moment 5-279 U/min
Low area with constant power 280 – 3.200 U/min
High area with constant moment 100-939 U/min
High area with constant power 940 – 3.200 U/min
Spindle taper ISO 50
C-Axis (Head) Indexing all 5 ° Grad
Workpiece table 2 disk arrays L x W (2x) 4.000 x 3.500 mm
Max. table load of the workpiece table 5 t/m²
Weight of the machine ca. 64 t
Machine accessories
- Tool magazine
- Automatic tool changer for 60 tools with chain magazine
- Tool holder ISO50
- Cooling by the spindle middle 30l/min by 7 bar at the tool
- Conveyor (length X-Axis on the left of the disk array)
State
Used