DMU 50 (Reference-Nr. 011146)

•  
  Reference number 011146

  Manufacture Year 2022

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  Working area 1
  Longitudinal	650 mm
  Cross	520 mm
  Vertical	475 mm
  Technical Data
  Type of main drive	AC
  Drive power (100% DC)	30 kW
  Drive power (40% DC)	46 kW
  Speed range	20 - 15000 rpm
  Spindle taper	HSK-A 63
  Clamping System	HSK-A 63
  Feed rate longitudinal/transverse/vertical	-42000/-42000/-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  General
  Universal Milling Machine; Control: CELOS with Heidenhain TNC 640
  Floor space/Weight
  Dimensions (L x W x H)	2,85 x 2,35 x 2,75 m
  Weight approx.	7500 Kg

• Specification

  
  

  Spindle speed 15,000 rpm, 200Nm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)
  NC swivel rotary table	Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
  Tool magazine 60 pockets	Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
  Swarf conveyor, with cleaned slot screen	Swarf conveyor, scraper type with cleaned slot screen
  Internal coolant supply 40bar/600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard)
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Chip flushing for working area	Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS)

• State

  Used