NHC 5000 (Reference-Nr. 064087)

•  
  Reference number 064087

  Manufacture Year 2022

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining Centers (Horizontal)

• Manufacturer

  DMG MORI

• Control

  Mitsubishi

• Description

  
  

  Characteristics
  Speed max.	15000 rpm
  Dimensions (L x W x H)	3,1 x 4,86 x 2,84 m
  Spindle taper	BT 40
  Tool Magazine with	40 Positions
  Rapid feed X / Y / Z	60/6060 m/min
  Movement X / Y / Z	730/730/880 mm
  Palett changer with	2 Pallet
  Maximum load (table centre)	500 Kg
  Swivelling range	360 x 0,001 degree
  Table size	500x500 mm
  Drive power (100% DC)	18,5 kW
  Weight approx.	11100 Kg
  General
  Horizontal machining center; Control: Control M730BM

• Specification

  
  

  (For Europe) European	(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissio
  Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)	Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mounting the high-pressure coolant system (separate type). Supplies the high-pressure coolant to the tool tip from the center of the spindle
  In-machine measuring system (spindle) optical signal transmission type touch sensor (RENISHAW, OMP60) + workpiece setter function	In-machine measuring system (spindle) optical signal transmission type touch sensor (RENISHAW, OMP60) + workpiece setter function
  In-machine measuring system (table) touch sensor (Magnescale) (tool length + diameter)	In-Machine Measurement System (Table) Touch Sensor (Magnescale) (Tool Length + Tool Diameter) The Magnescale touch sensor mounted on the table allows the tool length and diameter measurements and the tool breakage detection. During machining, the touch
  Part program storage length 1 MB (2,560 m) in total + Registerable programs 1,000 in total	Part program storage length 1 MB (2,560 m) in total + Registerable programs 1,000 in total The storage capacity can be increased to 1 MB, and up to 1,000 programs can be registered.

• State

  Used