Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
NHC 4000 (Reference-Nr. 064085)
Request about this Machine
Asking price
- Reference number 064085Manufacture Year 2022Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
Machining centresType of Machine
Machining Centers (Horizontal)Manufacturer
DMG MORIControl
MitsubishiDescription
Characteristics Drive power (100% DC) 18,5 kW Dimensions (L x W x H) 2,72 x 4,22 x 2,52 m Spindle taper BT 40 Tool Magazine with 40 Positions Rapid feed X / Y / Z 60/6060 m/min Movement X / Y / Z 560/560/660 mm Palett changer with 2 Pallet Maximum load (table centre) 400 Kg Table size 400x400 mm Speed max. 15000 rpm Weight approx. 7600 Kg General Horizontal machining center; Control: Control M730BM Specification
(For Europe) European Edition (For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mounting the high-pressure coolant system (separate type). Supplies the high-pressure coolant to the tool tip from the center of the spindle In-machine measuring system (spindle) optical signal transmission type touch sensor (RENISHAW, OMP60) + workpiece setter function In-machine measuring system (spindle) optical signal transmission type touch sensor (RENISHAW, OMP60) + workpiece setter function In-machine measuring system (table) touch sensor (Magnescale) (tool length + diameter) In-Machine Measurement System (Table) Touch Sensor (Magnescale) (Tool Length + Tool Diameter) The Magnescale touch sensor mounted on the table allows the tool length and diameter measurements and the tool breakage detection. During machining, the touch Part program storage length 1 MB (2,560 m) in total + Registerable programs 1,000 in total Part program storage length 1 MB (2,560 m) in total + Registerable programs 1,000 in total The storage capacity can be increased to 1 MB, and up to 1,000 programs can be registered. State
Used