DMU 65 H monoBLOCK (Reference-Nr. 064084)

•  
  Reference number 064084

  Manufacture Year 2022

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining Centers (Horizontal)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Horizontal universal machining center; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	650 mm
  Cross	700 mm
  Vertical	950 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min

• Specification

  
  

  Cabine	Full protection cabin
  Motor spindle 20,000 rpm	Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  NC swivel rotary table DirectDrive	NC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-a
  Kinematics axis A / C for swivel rotary table	Axis kinematics A/C for swivel rotary table Axis designation swivel axis: A Axis designation rotary axis: C 0° position A axis: table vertical Rotary axis setting: modulo Machine datum: In table center on the table top Not compatible with monoBLOCK kinem
  Tool magazine, wheel, 273 pockets	Tool magazine wheel magazine (3 wheels) with 273 tool pockets HSK-A63 or optionally chosen spindle taper

• State

  Used