ERFURT RDOH 2-400

•  
  Reference number 46337

  Manufacture Year 1996

  Operation Hours not applicable

• Vendor

  ProdEq Trading GmbH
  Reckholder 1
  9527 Niederhelfenschwil

  Switzerland

  

• Main Category

  Metal working machines

• Category

  Presses with mechanical driving

• Type of Machine

  H-Frame Multiple-Die Presses

• Manufacturer

  ERFURT

• Description

  CONTROLS
    PLC SIEMENS S7-400
  
  PRESS DESIGN
    drive system: eccentric / crank
    openings in uprights: yes
    number of suspensions: 2
    slide ejectors / cushion: yes
    table cushion: yes
    opening in table: yes
    quick die change system: yes
  
  PRESS FORCES
    total force (nominal): 400 to
    nominal work capacity: 32 kNm
  
  PRESS TABLE
    table surface (left-right): 2600 mm
    table surface (front-back): 990 mm
    thickness of bolster plate: 200 mm
    height above floor level: 800 mm
    opening in bed (left-right): 2325 mm
    opening in bed (front-back): 280 mm
  
  SLIDE
    slide force: 400 to
    table surface (left-right): 2600 mm
    table surface (front-back): 950 mm
    stroke: 210 mm
    stroke rate (max.): 90 /min
  
  SLIDE (MECHAN. PRESS)
    slide adjustment: 150 mm
    stroke rate (min.): 25 /min
    stroke rate (max.): 90 /min
    main drive power: 75 kW
  
  SLIDE EJECTOR / CUSHION
    number of ejectors: 13
    nominal force: 3.7 to
    stroke: 89 mm
  
  TOOL ASSEMBLY DIMENSIONS
    shut height (stroke down, adjustment up), BDC: 705 mm
  
  OVERALL SPECIFICATIONS (COIL LINES)
    sheet width max.: 400 mm
    sheet thickness max.: 5 mm
    coil weight max.: 4 to
    feed velocity max.: 50 m/min
  
  DECOILER
    design: single reel, traversable
    coil weight max.: 4 to
    max. diameter of coil: 1500 mm
    mandrel expansion range from: 460 mm
    mandrel expansion range up to: 530 mm
  
  LEVELLER UNIT
    number of leveller rolls: 9
    diameter of leveller rolls: 50 mm
    loop controls: yes
  
  STRIP-FEEDER
    feeder type: roll feeder
    roll diameter: 160 mm
  
  TRANSFER SYSTEM
    distance between tools, stroke X max.: 360 mm
    distance between tools, stroke X min.: 90 mm
    stroke Y max.: 80 mm
    stroke Z max.: 0 mm
    Inner width clamping rails closed max.: 470 mm
    Inner width clamping rails closed min.: 275 mm
    distance press table - transfer rail min.: 320 mm
  
  DIMENSIONS / WEIGHTS
    height above floor level: 6300 mm
    total weight approx.: 73000 kg
  
  ATTACHMENTS (PRESSES)
    European CE standards: yes
  
  
  + KOHLER coil line with SIEMENS S7-317 control system + Zig-zag feed 1-3 fold
  + HIESSL band lubrication unit + SANDER 2-axis transfer unit with variable feed + UNIDOR press force monitoring + die cushion bar in the table with exchangeable die cushions + System regularly maintained and in good condition

• State

  Used