Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
MEP SHARK 332-1 SXI EVO
Request about this Machine
Asking price
- Reference number 1108-66328Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
Sawing, Filing and Cutting-off MachinesType of Machine
Band Sawing Machines (Horizontal)Manufacturer
MEPTechnical data
- cutting diameter
- 300 mm
- capacity 90 degrees: flat
- 330 x 260 mm
- capacity 90 degrees: square
- 260 x 260 mm
- capacity 45 degrees: flat
- 270 x 200 mm
- capacity 45 degrees: round
- 260 mm
- capacity 45 degrees: square
- 250 x 250 mm
- capacity 60 degrees: flat
- 170 x 170 mm
- capacity 60 degrees: square
- 170 x 170 mm
- capacity 60 degrees: round
- 180 mm
- turning speed range:
- 40 / 80 m/min
- dimensions of saw-band
- 3320 x 27 x 0,9 mm
- engine output
- 1,5 / 1,8 kW
- weight
- 670 kg
Description
Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with
semi-automatic-dynamic, manual function, has a MEP-28 control
for miter cuts from 45° right to 60° left.
Some features:
New centralized switch console on an articulated arm.
Low voltage control panel:
Polyester membrane keyboard with thermoformed highlighted
Push buttons and actuation control signal.
Display to show:
* Diagnostics (messages in the user language)
* Alarms (description of alarm causes)
* State of inputs and outputs
* Counting cuts
* Time taken for the cut made
* Current consumption of the saw blade motor
* Saw blade tension
* Blade speed
* Numerical display of head position.
Switch handle IP55 of manual 24V cycle.
Complete program of all special cutting cycles.
Identification of other possible special cutting cycles for special ones
Applications
New, latest generation hydraulic control unit, extremely powerful
and with low energy consumption.
Turntable (on roller bearings of 420 mm with preloaded thrust bearings
assembled).
Double belt speed (40/80 m/min.) with control
Intended to accommodate an electronic inverter for the
Continuous regulation of the belt speed from 20 to 90 m/min.
Stroke of the saw bow can be programmed directly from the control panel
Adaptation to the cutting material.
Clamping device can be moved laterally to the left and right
Quick release vice.
Manually operated strap tension control with display on the screen
electronic converter.
Base designed to completely contain the coolant,
even with maximum angle cuts.
The coolant pan (provided with an electric pump for lubrication and
Cooling of the saw band) and the chip drawer (can be replaced by a
Chip conveyor to be replaced - see special accessories) are in the base
frame
built-in.
Preparation for installing the minimum blade lubrication kit
(Optional, in addition to the conventional standard lubrication with
emulsion oil.
Chip clearing brush.
The machine is intended for pallet truck transport.
Adjustable length stop for cuts of the same length
Material support arm with roller for attaching the loading platform
Bimetal saw band for solid and profile material.
Tools and instructions for use in the respective user language.
This ad was created with MODUL MWS - the software solution of LogoTech.State
Used