BERG & SCHMID X-Rock 1250

•  
  Reference number 1108-66256

  Operation Hours not applicable

• Vendor

  WMT GmbH & Co.KG
  Siemensstraße 1
  46342 Velen-Ramsdorf

  Germany

  

• Main Category

  Metal working machines

• Category

  Sawing, Filing and Cutting-off Machines

• Type of Machine

  Band Sawing Machines (Horizontal)

• Manufacturer

  BERG & SCHMID

• Technical data

  1000 mm

  1000 mm

  1200x1000 mm

  saw band length

  11300 x 80 x 1,3 mm

  table height

  790 mm

  band speed

  14 - 60 m/min

  total power requirement

  18 kW

  weight of the machine ca.

  9,0 t

  dimensions

  5,0 x 1,68 x 3,15 m

• Description

  The semi-automatic, hydraulic saws from the X-tech line offer the best
  Saw technology and best performance when cutting special steels
  • The electro-welded machine frame and the steel saw frame meet requirements
  all cutting needs and eliminate vibration and noise.
  • The chip conveyor is hydraulically driven and the speed is
  adjustable
  • All movements of the machine (saw frame, vice, feed,
  Saw band guides) are carried out thanks to modern linear guides with high
  static and dynamic load performance, which also has very low sliding friction
  to guarantee.
  • Another characteristic feature is the roles for the
  Positioning of the material by a hydraulic motor
  are driven. They move at right angles to the material, and
  thus allowing optimal clamping of the material.
  • Thanks to the height control of the saw band position, the operator can place
  the band in
  place near the top edge of the material. After the cut is finished, the tape
  automatically raised back to the previous position. Alternatively you can
  also
  “Remain” can be selected in the lower position. During the
  The software compares the cutting load with the cutting cycle
  Default. This means that the sawing system can be stopped in the event of
  irregularities
  become.
  • The saw band is cleaned by two adjustable steel brushes. The drive
  takes place hydraulically.
  • The hydraulic unit including filter and pressure gauge guarantees one
  particularly quiet operation at constant pressure.
  • Finely ground carbide inserts that clamp the saw blade, complete with
  lateral, hardened and adjustable guide rollers. The adjustable one
  The tape guide automatically moves as close as possible to the material.
  • The saw band is tensioned via a hydraulic cylinder, which is carried out by
  the
  Machine software is controlled. The voltage is set according to a given
  Time automatically delimbed when the machine is idle or after
  a cycle has been carried out.
  • Automatic version with CNC control in the X-TECH 900 / 1200 models
  a feed length of 500 mm for the series for high production rates.
  • The material is carried by a table with seven rollers. These will
  driven by a hydraulic orbital motor through which the material
  can be placed precisely even under maximum load.
  • All guided movements are carried out by four recirculating ball guides with
  one
  high capacity for static and dynamic loading; strong
  reduced feed friction. Tempered and ground prismatic
  Guides.
  Price on request.
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used