GEKA HYD 80 S

•  
  Reference number 1069-895

  Operation Hours not applicable

• Vendor

  HESSE + CO Maschinenfabrik GesmbH
  Industriezentrum NÖ-Süd, Straße 4 Objekt 8
  2351 Wiener Neudorf

  Austria

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  5 Sides Machining centres (Vert/Hor)

• Manufacturer

  GEKA

• Technical data

  neu

  ca. 8 Wochen ab Auftragse

  Spanien

  21200 €

  434.6 €

  80 to

  300 mm

  5

  40/14 bzw. 24/24 mm

  70 mm

  40 1/min

  450x15 / 300x20 mm

  130x130x13 mm

  45 mm

  12x52x90 mm

  9 kW

  2310 mm

  1200 mm

  2050 mm

  2070 kg

• Description

  2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm standard hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photo shows mod. hyd 80 SD) OPTION "KIT" EURO 930,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 80 series: model SD EURO 23.700,-- as model S but 500 mm gap weight 2.400 kg WE HAVE MORE THAN 700 REFERENCES!
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used