531,825 miembros*
3,260 online*
Registrase aquí GRATIS
Login
531,825 miembros
IndustryArena Foro > Informática > Software > communication software for FANUC
Resultados 1 al 2 de 2
  1. #1
    Member
    Fecha de Ingreso
    13 may, 16
    Ubicación
    Spain
    Mensajes
    8

    communication software for FANUC

    We often use the typical communication software for FANUC I downloaded from http://www.softpedia.com to load/download the programs from the PC.

    http://www.softpedia.com/get/System/...or-FANUC.shtml

    We use this application for all the FANUC CNC but now we have a new machine with FANUC 0i-TF model.
    I set up the IP address: 192.168.1.1 and mask to: 255.255.255.0
    I think FOCAS port number should be 8193 (that is the way we set in other machines).
    Unfortunately I cannot succeed.
    I tried with the RS232C (COM ) connection and It works but prefer to avoid this type of communication (it is slower and less comfortable).
    I use the COM communication only for old CNC where Ethernet is not available.

    Does anyone know how to set up the FANUC 0i-TF CNC for Ethernet connection?.
    Thank you for your help!

  2. #2
    Member
    Fecha de Ingreso
    13 may, 16
    Ubicación
    Spain
    Mensajes
    8
    I’m still using the COMMUNICATION SOFTWARE FOR FANUC CNC , it works very well with all FANUC CNC I have even with old SIEMENS CNC with RS232 connection.
    Now I would like to get rid of cables and use WiFi connection instead.
    This is an old project I have but I do not have experience with wireless connection.
    Has anybody tried to use mentioned software with wireless connection?.
    I downloaded the latest version of "COMMUNICATION SOFTWARE FOR FANUC CNC" from SOFTPEDIA:
    https://www.softpedia.com/get/System...or-FANUC.shtml

    I would really appreciate your help.
    Regards
    Juan Carlos

Permisos de Publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •