Sigo acá, en le mismo orden de ideas si es posible me pueda traducir lo expuesto en su blog :SYNC signal.
This is one of the most important signals, its function is to serve as reference frequency for the choppers at the Power Stage, but it serves a second and very important function: It defines the "blanking time" on the chopper comparator circuits. We will be talking about the "blanking time" when we get to the chopper's circuit description, and a little more when we discuss the blanking time relationship with the minimum step current regulation.
The Sync signal is generated on a hardware 8 bits PWM generator inside the Micro-controller Chip, the "blanking time" is adjustable in the firmware.
Si no es pedir demasiado, ahondar mas en el tema sobre el "dead time" y el "blanking time", o algún libro que aborde el tema.

Sus diseños son fascinantes, pero casi imposible de realizar en algunas latitudes debido a la imposibilidad de conseguir las piezas o motivado a los costos,por eso concuerdo ampliamente con Mardus:

Nobody talks about microstepping by unipolar stepper drivers. Why? I'm not count on controllers with microchips (SLA ....etc...). I am interested on discrette one.
Comments ? http://www.cnczone.com/forums/showthread.php?t=25361

Por lo que seria muy interesante y necesario desarrollar un proyecto exclusivamente con
componentes discretos exceptuando los micros en ambas versiones avr y microchip, si de verdad se desea lograr un diseño universal con prestaciones profesionales.

por lo momentos, me desespera no poder terminar mi proyecto. =(
Desde ya muchas gracias por las respuestas...