[JUANCARL]

We often use the typical communication software for FANUC I downloaded from http://www.softpedia.com to load/download the programs from the PC.

http://www.softpedia.com/get/System/...or-FANUC.shtml

We use this application for all the FANUC CNC but now we have a new machine with FANUC 0i-TF model.
I set up the IP address: 192.168.1.1 and mask to: 255.255.255.0
I think FOCAS port number should be 8193 (that is the way we set in other machines).
Unfortunately I cannot succeed.
I tried with the RS232C (COM ) connection and It works but prefer to avoid this type of communication (it is slower and less comfortable).
I use the COM communication only for old CNC where Ethernet is not available.

Does anyone know how to set up the FANUC 0i-TF CNC for Ethernet connection?.
Thank you for your help!

[JUANCARL]

I’m still using the COMMUNICATION SOFTWARE FOR FANUC CNC , it works very well with all FANUC CNC I have even with old SIEMENS CNC with RS232 connection.
Now I would like to get rid of cables and use WiFi connection instead.
This is an old project I have but I do not have experience with wireless connection.
Has anybody tried to use mentioned software with wireless connection?.
I downloaded the latest version of "COMMUNICATION SOFTWARE FOR FANUC CNC" from SOFTPEDIA:
https://www.softpedia.com/get/System...or-FANUC.shtml

I would really appreciate your help.
Regards
Juan Carlos

[kirito39]

thanks for sharing the link with us guys, it helped a lot.kinemaster mods

[Enriquedesignerandprogrammer]

Hello!

Let me invite you to my youtube channel where you will find some solutions to your daily problems, I hope you help us subscribe and share it!
https://www.youtube.com/watch?v=dcE2oWu9ffM

[RogerEye1253]

Obviously at one point or another, you will need ethernet connection for all kinds of activitiesNulls Brawl APK.

[ethanmile]

Keep sharing with us.OGinstagram Apk

Yeah keep sharing with us, and I am totally agree with on this motive.

[JUANCARL]

I downloaded the last version of COMMUNICATION SOFTWARE FOR FANUC CNC (V94.2) from the same link:https://www.softpedia.com/get/System...r-FANUC.shtmlI would recommend trying it, there are nice new features on it!.