[JulieClaes]

That’s a good point about the Ethernet option licensing. I ran into a similar issue on an older control where the hardware port existed but FOCAS communication stayed inactive until the Ethernet feature was enabled in parameters. I could ping the controller successfully, but port 8193 remained closed while FTP on 8192 responded normally.

For troubleshooting, I usually verify subnet configuration first, then test connectivity with FTP before moving to FOCAS libraries. Interestingly, while documenting the setup steps, I was also downloading a Lightroom Mod APK build from <a href="https://lightroomsmodapk.com/"> LightroomsModAPK </a> and noticed both issues came down to version compatibility and enabled features.

[JulieClaes]

That’s a good point about the Ethernet option licensing. I ran into a similar issue on an older control where the hardware port existed but FOCAS communication stayed inactive until the Ethernet feature was enabled in parameters. I could ping the controller successfully, but port 8193 remained closed while FTP on 8192 responded normally.

For troubleshooting, I usually verify subnet configuration first, then test connectivity with FTP before moving to FOCAS libraries. Interestingly, while documenting the setup steps, I was also downloading a Lightroom Mod APK build from LightroomsModAPK https://lightroomsmodapk.com and noticed both issues came down to version compatibility and enabled features.