G73 okuma help me

Good afternoon,

I’m new to programming; I previously used Fanuc and Mazak. Now, I changed jobs, and at this new company, they only have Okuma machines. I have many questions, but I'll start with the following:

Currently, I’m only doing the setup because the programs are basically already written, and I noticed that in the code for grooves (G73), the same tool is used with a different offset. This is my main concern, and I’ll send an example of the code to see if someone can explain and help me with this issue. Usually, with Fanuc and Mazak, just specifying th inserte width was enough.

---

Let me know if you need any more help!


NAT11
NO500G975850M42M08u
M2161
VLMON [12]=11+
N0501G00X2.95z-2. 567T1111111
N0502X1.65u
N0503Z-2. 5624
N0504G73X0.965Z-1.592K0.156D0.10L1.5F0.0035E0.135T21(*)
N0508G00Z-2. 567T111111
N05092-2. 469г
NOS10G73X0.7952-1.66510. 5K0.151D0. 50L1. 5F0. 0035E0.135T21(*)
M09
G00X202201
VLMON [12]=01
M215
M02

¡Encontre los juegos mas interesantes en Chile y ahora los juego aqui - 1xbet en Chile , no importa como lo mires, este es el mejor sitio para pasar un buen rato jugando y obtener tanto impresiones positivas como la oportunidad de pasar un buen rato jugando, he apreciado completamente este sitio por mucho tiempo jugando aqui y puedo decir que definitivamente vale la pena su atencion!