525,749 miembros *
2,694 online*
Regístrese aquí GRATIS
Iniciar sesión Registrarse
Fleckenstein

Contacto

FLECKENSTEIN Werkzeugmaschinen GmbH
Sommerweg 15
63831 Wiesen
Alemania
+49 6096-9706-0
+49 6096-9706-20

Planeador de ruta

Planeador de ruta

Surface Grinding Machine BLOHM PLANOMAT 608

Base para la negociación
Ab Lager Kleinostheim


  • Número de referencia 1118-15410
    Fabricación 2001
    Horas en funcionamiento Sin resultados
  • Metal working machine
  • Grinders
  • Surface Grinders with horizontal spindle
  • BLOHM
  • grinding length:800 mm
    grinding width:600 mm
    Max. distance table to spindle axis:700 mm
    max. table load:800 kg
    Table clamping area with additional space :1.200 x 600 mm
    Table travel longitudinal max.:900 mm
    Table speed:30 - 3.000/300 - 30.000 stufenlos regelbar mm/min
    grinding path adjustment :Über Setztasten im Bedienpult
    guidance system:Vorgespannte Wälzführungen
    Table drive :Servo-Motor mit Kugelgewindetrieb
    manual table adjustment:Über Joy-Stick am Bedienpult
    measuring system:0,001 mm rotatorisch
    Max. distance table to spindle axis:700 mm
    rapid traverse:3.750 m/min
    guidance system:Vorgespannte Wälzführungen
    drive system:Servomotor mit Kugelgewindespindel
    measuring system:0,001 mm rotatorisch
    automatic cross movement:max. 560 mm
    crossing path automatic:40 - 4.000 stufenlos mm
    rapid traverse:4.000 mm/min
    guidance system:Vorgespannte Wälzführungen
    drive system:Servomotor mit Kugelgewindespindel
    measuring system:0,001 mm rotatorisch
    Grinding spindle speed max.:3.400 1/min
    Electric capacity:15 kW
    max. measures grinding wheel (DA x B):400 x 80 mm
    inner bore:127 mm
    Constant peripheral speed:35 m/sec
    Max. Peripheral speed:45 m/sec
    Dressing:Abrichtbetrag wird autom. kompensiert
    connected load:19 kVA
    voltage:400 V
    mains frequency :50 Hz
    weight of the machine ca.:4900 kg
    dimensions of the machine ca.:4,6 x 4,2 x 2,45 m

    BLOHM Grinding control ERGOMATIC
    Movable setup console in the middle of the machine:
    Electronic handwheels for conventional operation of the machine for axes Y and Z.
    Joy stick for the axes X and Z.
    Feed control per axis via potentiometer, also active during program run.

    Control panel on support arm on the right side of the machine:
    LC display, visible area 121 x 103 mm, with backlight
    Membrane keyboard with short-stroke keys for acknowledging recommended default values or for entry of freely selectable parameters with the following functions:
    - Loading position X and Z axis
    - Set or change reversing points during the program
    - Set zero points for Y and Z axis
    - Set safety position
    - Set grinding wheel data
    - Select dressing function
    Softkey for preselection measuring system metric / inch
    Info button for help texts and service instructions
    Display for operating hours and maintenance intervals

    Fixed programs for workshop-related, operator-friendly handling:
    - Reciprocating loops with automatic Y-feed
    - Longitudinal, circumferential and surface grinding with intermittent or continuous crossfeed
    and automatic Y positioning
    - Grinding wheel adjustment with handwheel or automatic
    - ECO loops with automatic Y positioning:
    1st layer: plunge grinding "roughing"
    2nd layer: Surface grinding "finishing"
    3rd layer: surface grinding "fine finishing"
    Automatic Y positioning: 3 layers with dressing, 10 parameter sets for 10 delivery programs storable, allowance or finished dimension grinding preselectable.

    Dressing programs:
    - Straight dressing from the table with compensation by single diamond, foldable dressing unit.
    - face dressing with single diamond or foldable dressing unit.
    - Dressing with compensation by automatic straightening device.
    - Deep dressing with compensation by PEA-T100.

    Coolant cleaning equipment

    Coolant system with belt filter (tank capacity 1,400 l) consisting of: - Belt filter with a cleaning surface of 2.25 m² for a flow rate of 250 l / min - Supply pump 200 l / min, 4 bar - Additional pump for water trough flushing and rinsing gun - Cooling unit for coolant emulsion with max. 5% grinding concentrate - Power 4.9 kW (4,200 kcal / h), refrigerant CFC-free

    Equipment/Accessories
    - Basic machine with work enclosure closed at the top
    - Spindle drive 15 kW, frequency controlled
    - Manual balancing device MPM incl. Vibration sensor and speed sensor
    - Belt filter coolant cleaning system Tank capacity 1,400 liters
    - Pneumatically folding dressing unit
    - Electro-permanent magnetic clamping plate 800 x 600 mm, transverse pole pitch 4 mm, with 8-fold adhesion control
    - 2 pieces of grinding wheel flanges
    - 1 pc. balancing mandrel
    - Machine documentation incl. CE conformity declaration
    - Finish: RAL 5009 azure / RAL 9002 gray white
    Grinding spindle insert renewed 02-2016


Enviar pregunta

Más máquinas de FLECKENSTEIN Werkzeugmaschinen GmbH