501,550 miembros
4,087 online
Regístrese aquí GRATIS
Iniciar sesión Registrarse
Fleckenstein

Contacto

FLECKENSTEIN Werkzeugmaschinen GmbH
Sommerweg 15
63831 Wiesen
Alemania
+49 6096-9706-0
+49 6096-9706-20

Planeador de ruta

Planeador de ruta

Machining Center - Vertical MATEC 30 HV/K

Base para la negociación
Ab Lager Kleinostheim


  • Número de referencia 1118-1575
    Fabricación 2007
    Horas en funcionamiento Sin resultados
  • Metal working machine
  • Machining centres
  • Machining Centers (Vertical)
  • MATEC
  • x-travel:1.300 mm
    y-travel:600 mm
    z-travel:800 mm
    NC-rotary table:630 diam./mm
    max. torque S1/S4:270/600 Nm
    max. Speed:80 min-1
    embedded in the machine table:HSK 63
    :1.515x635 mm
    power on torquemotor:_
    rotary table directly connected to motor flange:_
    milling head::_
    travel:+/-105°
    max. torque:800 Nm
    max. Speed:50 min-1
    pitch accuracy:0,001 °
    milling spindle:_
    power:30 kW
    max. torque:800 Nm
    max. Speed:15.000 min-1
    tool taper :HSK 63
    max. boring diameter:diam. ca. 60 mm
    Max. Milling-capacity:ca. 500 cm³
    threading:M 30
    temperature controlled liquid cooling:
    feed, rapid traverse:_
    feed range for X-, Y-, Z- axis:1-30.000 mm/min
    max. feed force X-, Y-, Z-axis:15.000 N
    max. rapid rate X,Y,Z - axis:30 m/min
    rapid feed C-axis (NC-rotary table):80 U/min
    tool magazine, tool changer:_
    number of places each cassett:46
    tool taper:HSK 63
    DIN:69893/form A
    Dimensions ca.:5,3 x 4,4 x 3,4 mm
    machine weight ab.:9.500 kg
    Total weight, approx.:11.500 kg

    Equipment & Accessories ? Fully encapsulated working area with openable roof ? direct measuring system in all axes ? chip conveyor ? rinsing gun ? working light ? increased motor power ? electronic handwheel ? Internal coolant through spindle ? coolant equipment manufacturer Mayfran consists of coolant tank 600l,filtration unit, rinsing gun, high pressure pump 20l\min at 70bar, pressure relief valve, switch box for control unit ? compressed air at the outer nozzles ? Internal coolant compressed air through the tool ? Oil mist extraction system ? Electrostatic air filter, vertical, with motor and blower, air capacity approx. 1.000 m³\h, total power 300W ? 3D-measuring probe with radio signal transmission ? hydraulic unit 400bar ? pneumatic connection with maintenance unit The vertical machining center Matec 30HV/K in performance class HSK-A 63 is equipped with a Heidenhain iTNC530 control. The short version of this vertical center has a swivelling spindle head and a rotary table with a diameter of 630 mm integrated into the worktable. The selected axis arrangement therefore permits full 5-sided machining. The reinforced main spindle with a drive power of 30 kW and the tool changing system with 46 seats round off the top end of the performance package.

Enviar pregunta

Más máquinas de FLECKENSTEIN Werkzeugmaschinen GmbH