512,305 miembros
2,802 online
Regístrese aquí GRATIS
Iniciar sesión Registrarse
Fleckenstein

Contacto

FLECKENSTEIN Werkzeugmaschinen GmbH
Sommerweg 15
63831 Wiesen
Alemania
+49 6096-9706-0
+49 6096-9706-20

Planeador de ruta

Planeador de ruta

Drilling and Milling M/C UNION TC 150

Base para la negociación
ab Lager


  • Número de referencia 1118-1586
    Fabricación 2007
    Horas en funcionamiento Sin resultados
  • Metal working machine
  • Borers
  • Borers (Table type)
  • UNION
  • bore capacity in steel (diameter):150 mm
    x-travel:2.500 mm
    y-travel:2.500 mm
    max.roll thread.length in through put process:1.500 mm
    W-Axis, movement quill:750 mm
    B-Axis, rotary movement table:360 Grad/degrees
    b-axis, positioning accuracy :360.000 x 0,001° °
    workgin unit: :-
    fixed spindle nosing, length:300 mm
    Fixed spindle nosing, diameter:280 mm
    shortest distance, spindle nose to mid of table:850 mm
    lowest position above table surface:0 mm
    spindle taper (short taper acc. to DIN 69871):SK 50
    spindle power S1 (100%) / S6 (60%):37/46 kW
    max. torque at the spindle:2.179 Nm
    Spindle speed, steppless adjustable :5 - 3.000 min-1
    NC-rotary table clamping size:1.600 x 2.000 mm
    center hole in table:100 mm H6
    table load (max.150mm outside table center):10.000 kg
    width of T-slots:28 mm
    T-slot width:160 mm
    position :360.000 x 0,001 °
    Max. Feed range for X-, Y-, Z- and W-Axis:6.000 mm/min
    Rapid traverse for all linear Axes :15.000 mm/min
    B-axis:3 min-1
    Data for electrical installation:-
    voltage:3~ 400/230 V
    frequency:50 Hz
    connected load:90 kVA
    magazine type:Kettenmagazin
    no. of tools in magazin:60
    max. tool-Ø adjacent slots occupied :125 mm
    max. tool-Ø adjacent slots free:250 mm
    max. tool length :500 mm
    max. tool weight:30 kg
    max. tilting moment:50 Nm
    total power requirement:46 kW

    Working hours
    ?Power ON? ca. 23.000 h
    ?Program run? ca. 8.800 h



    Accessories
    Partial enclosure of the work area, special enclosure at the table - movable all round
    Operating mode 3
    Chip conveyor
    Coolant system for internal & outside cooling 30l/20 bar, 50l/3 bar
    Coolant cleaning by band filtration unit, coolant tank content 990l
    Tool magazine 60 places, automatic change
    support bearing
    Torque monitoring of the working spindle
    minimum lubrication instead of emulsion coolant
    3D remote radio touch probe

Enviar pregunta

Más máquinas de FLECKENSTEIN Werkzeugmaschinen GmbH