584,862 miembros *
4,717 online*
Regístrese aquí GRATIS
Iniciar sesión Registrarse
EMAG Holding Productos

Alimentadores automático monohusillo

VT 2
VT 2
Turning machine for vertical 4-axis shaft machining
EMAG Holding GmbH
Alimentadores automático monohusillo
VT 2
VT 2 ? The turning machine for vertical 4-axis shaft machining Where shaft machining involves large numbers of workpieces, the first choice must be the VT series of turning machines. In the machining of shafts on turning machines the focus is on the speed of the process, whereby both loading / unloading and the machining cycle need to be very fast. This optimal requirement is fulfilled with the VT 2 turning machines. Four axes, short travels, powerful mainspindle ? these are the strengths of the VT 2 turning machines. The full impact can be best felt where the component batches are large. Of decisive importance in the use of these turning machines is the ?two-sided? machining process, which massively reduces the machining time on the VT 2 turning machine.
  • VT 2 Work area
  • VT 2 - IoT Ready
VTC 100
VTC 100
Torno vertical
EMAG Holding GmbH
Alimentadores automático monohusillo
VTC 100
Torno vertical VTC 100: mecanizado vertical de árboles con 4 ejes La especialidad del torno vertical VTC 100 es el mecanizado de ejes de hasta 400 mm de largo en grandes cantidades. Gracias a la carga y descarga automatizadas, integradas en el concepto de la máquina, este es un sistema de producción que se caracteriza por trayectos muy cortos. Además, utiliza un husillo principal de gran potencia (34 kW, 144 Nm, 6000 rpm). Cargar el torno vertical mediante el revólver es muy rápido.
Detalles de producto Ir a la página principal Ficha de datos Consulta del producto