535,401 miembros *
2,689 online*
Regístrese aquí GRATIS
Iniciar sesión Registrarse


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Planeador de ruta

Planeador de ruta

HSC 55 linear (Reference-Nr. 055076)

Precio a petición

  • Número de referencia 055076
    Fabricación 2013
    Horas en funcionamiento Sin resultados
  • Metal working machine
  • Machining centres
  • High Speed Machining Centers (HSC)
  • Siemens

  • General
    HSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover; Control: 3D Control Siemens 840D solutionline operate
    Technical Data
    Spindle taper HSK-A 63
    Feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
    Rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
    Working area 1
    Longitudinal 450 mm
    Cross 650 mm
    Vertical 460 mm
    Tool changer
    Application Vertical
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 60
    Floor space/Weight
    Dimensions (L x W x H) 5,48 x 4,23 x 2,9 m
    Weight approx. 9500 Kg

  • Motor spindle with HSK-A 63 Drive power (100% DC) 28 kW
    Drive power (40% DC) 38 kW
    Speed range - 28000 rpm
    Spindle taper HSK-A 63
    HSC55 linear 5-Axis Specification HSC 55 linear 5-Axis Specification NC-trunion table clamping area 400 x 400 mm, 15,7 inch x 15,7 inch Tilting range A-axis +10/-110°; C-axis 360° Table load max. 200 kg / 440 lbs Absolute Measuring systems incl. permanent cooling of A- and C-axis motor
    Chain-type tool magazine 60 pockets Tool magazine 60 pockets Chain with double gripper (differently from standard)
    Laser tool measuring Renishaw Laser tool measuring Renishaw for tool length and diameter including calibration tool
    Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3 quickSET for one machine. 5 axis machine configurations (only with option touch probe)
    Oil and Emulsion Mist Separator Oil- and emulsion mist separator capacity 600m³/h, 0.5kW respective 21,189ft³/h, 0.7hp
    Air blast through spindle centre Air blast through spindle centre activated by M function and softkey maintained air with a light lubrication
    High-Speed-Settings High-Speed-Settings Selection of the optimal milling mode for the next machining-step.
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Special equipment Paper belt filter system 80 bar, 980l tank Pressure levels can be programmed via H addresses including rotoclear including extended workspace flushing Scraper belt conveyor with wedge wire separator (Make Knoll)

Enviar pregunta

Más máquinas de DMG MORI Global Marketing GmbH