DMF 400|11 (Reference-Nr. 030335)

•  
  Número de referencia 030335

  Fabricación 2023

  Horas en funcionamiento Sin resultados
• Categoría principal
  Metal working machines
• Categoría
  Milling machines
• Tipo de máquina
  Bed milling machines (moving column)
• Fabricante
  DMG MORI
• Control
  Siemens
• Descripción
  
  

  General
  Travelling column milling machine; Control: CELOS X with Siemens 840D SL Operate
  Technical Data
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  Working area 1
  Longitudinal	4000 mm
  Cross	1100 mm
  Vertical	1050 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	50

• Especificación
  
  

  NC-swivel head (B-axis)	Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel range: +/- 120° Swivel speed: 50 rpm
  Spindle speed 12,000 rpm, 430 Nm	Motor spindle powerMASTER SK50 Spindle speed 20 - 12.000 min-1 for tool holder according to DIN ISO 7388-1-A50 Output 52/42 kW (69.7/56.3 hp) Torque 430/300 Nm (318.2/222 ft lbs) (40/100% duty cycle) Tool magazine 30 places SK50 At speed 10,000-12,000 min
  Fixed table	Fixed Table
  	Table surface 4600 x 1100 mm
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Tool magazine 50 places	Tool magazine 50 places SK50/HSK-A100 Chain type with double gripper
  NC-subtable 700-1, A-axis, left working area	NC-sub table 700-1 (A-axis) Left working area
  Removable partition wall DMF |11	Partition wall removable for pendulum machining, 2 working spaces
  Infrared measuring probe PP60 optical	Infrared touch Probe for ISO 50 make Renishaw PP 60 optical (OMP 60) Tool taper suitable for the spindle
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Tool measuring Heidenhain TT160	Tool measuring device Heidenhain TT160 Tool length and diameter measurement with cleaning air-blast, Calibration Tool with tool holder (not with Laser possible, for pendulum machining please order 2 pieces)
  Inner coolant supply 40Bar/980l	Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  Oil mist separator	Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
  Sensor package i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  Signal lamp 4-colour	Signal lamp, 4 colours
  Door drive for working area doors	Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Special equipment	Trade fair design Green Mode, consisting of: -Brake Energy Recovery -LED lights -Adaptive Feed Control -Advanced Energy Monitoring -Air Leakage Monitoring Chip conveyor with elevated discharge 1250mm

• Estado
  Usado

Me gusta 0